fuel injector rebuild
 

anyone know where i can get a rebuild kit for the 35lbs injectors? or somewhere i can send them to have them cleaned?

also i have a set of brown ones (stock) and black ones with green band(aftermarket) which would be the best?

i have came up with this the stock (brown) are pintle-types. and the others are disc type. the pintle type have a fog type spray and the disc are more of a stream which is not all that great. so i will do the stock ones.

I used witchhunter one time to do a rebuild on my injectors. Great service and turn around. They are in washington though iirc

RC engineering (??)

they want a 100 for 4 injectors

Buy new injectors. Those are over 20 years old, All they do to them are clean and replace caps and o-rings. The insides can't be rebuilt.
I have seen a lot of them come back and start leaking after a few miles.
I have rc #55 injectors on mine now. No problems at all.

If you really want them cleaned and tested them pm 1TONY1 on SCF.

He lives in Ringgold and does them

I know some guys up there in ringgold. Nice place to visit!!!

Cleaned and tested is the key word. If they are bad in most cases they will find out then.

i forgot about him! thx