Geek stuff from Moates.net
Just an FYI to all you gearhead geek types, Craig has the Ford chips etc. back up on his website. I will try to post pictures of the few little things that I ordered which arrived yesterday. Will try to get them up sometime later tonight............... :jester:
The PCMX software can also be used for editing binary files to be used with this hardware....note this is not for the faint of heart..... |
Re: Geek stuff from Moates.net
Quote:
:jester: |
Re: Geek stuff from Moates.net
:lol: .....it only takes time and "LOTS" of it to learn....
|
Re: Geek stuff from Moates.net
Quote:
|
Re: Geek stuff from Moates.net
Yep lots & lots of Advil ................ :banana:
|
Re: Geek stuff from Moates.net
Yep, I saw the posts on all the Moates stuff on the mailing list - and quickly saw that that crap was WAY over my head... :lol:
|
Re: Geek stuff from Moates.net
Quote:
Q&A > What chip addressing do I use when programming a F1/F2 for a EEC-IV ? When programming for EEC-IV, you want to put a 56k binary from 032000-03FFFF. What chip addressing do I use when programming a F1/F2 for a EEC-V ? When programming for EEC-V, use the following addressing: BANK0: 002000-00FFFF BANK1: 012000-01FFFF BANK8: 022000-02FFFF BANK9: 032000-03FFFF (note I had some issues with bank9 on an '03 Mach 1 car I need to go back and verify from my notes- Dale McPeters) When pulling a bin from a EEC-V, use the following addressing: BANK0: 002000-00FFFF BANK1: 012000-01FFFF BANK8: 022000-02FFFF BANK9: 032000-03FFFF (note I had some issues with bank9 on an '03 Mach 1 car I need to go back and verify from my notes- Dale McPeters) Here is the link in case anyone wants to take a look. http://www.moates.net/mike/faq.html#f2q1 Now go get the Advil !!!! :lol: |
Re: Geek stuff from Moates.net
Ahh, yes, it's all coming back to me now. By that, I mean the possibility of throwing up after reading that...
|
Re: Geek stuff from Moates.net
It is just because of all the Advil........:lol:
|
Re: Geek stuff from Moates.net
If PCMX & GUI saves as .bin .......
Open binary with CalEdit...... Write TwEECer........ Zoooooooooom! |
All times are GMT -6. The time now is 01:31 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.