672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

Decided to dyno the car today before I ripped the ole heaton off, and install the 2.4KB. I never knew what the car was dyno'n with the eaton/n20 and latest shot so I gave it a whirl. All pulls were done with empty tank with 5 gallons of 93 Octane and 32oz of Torco premixed in the tank. Pulled the plugs and they look pristine.

1st off thanks to XXX Motorsports in Pensacola, finally a dyno close to me.

1st pull was 618/732 tq SAE on the .048 jet which I usually run at the track a/f was rich on the big end, didnt have a way to tune it out so I decided to up the n20 jet to a 100 shot or there about .053 jet, and did the car respond like a madman.

2nd pull I threw the .053 jet in and sprayed it a lil later at 3700, didnt want to lug it down at all, and the car responded violently to 672whp 763tq SAE

STD #'s were 690whp 784tq. I think 700whp is very possible with some simple work in the tune and a slightly bigger n20 jet with the ported eaton.

http://img395.imageshack.us/img395/8...shotn201zv.jpg


Well see what happens now, KB goes on this week, plan on a small shot of sauce, alot of octane and hope she stays in one piece by the time the track rental rolls around. Had a blast last time



VIDEO ADDED

http://media.putfile.com/n20-cobra

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

Damn gotta love the torque. Who did the porting on your eaton and how well was you pleased with it?

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

Good Gawwd!!!!


That's awesome

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

:hail:

I want a Steggy Stg IV so bad.

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

Stegiemiere Engine Airflow out of St Louis, best in the business been porting blowers the longest and have the strongest #'s.

vid added

http://media.putfile.com/n20-cobra

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

:metal:

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

:huh: Dang it. That's just crazy.

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

X Eleventy Bazillion!!!!!:banana:

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

broke....
U gonna show me how to launch at Track Day???
I watched you hookin' at the last one........AWESOME!!!

Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot
 

guess me and pulley breaker need a freaking 100 dry shot and a port..

SHIT