96 Cobra Maf
 

I am working on a project and need a good stock 96 Cobra Maf file. The one in Tweecer is all messed up when I load it into my strategy, CDBA4-EBP2. This is a Linclon MRK VIII PCM. And if your woundering why we used this Pcm the engine has a 4R70W trans behind it.

Thanks

Shelby

Re: 96 Cobra Maf
 

You will more than likely have to contact Mike Glover on this issue....

Re: 96 Cobra Maf
 

Wrote Mike last night, Hav'nt herd back yet. I was hopefully going to find a 30 point stock table to compare with the one that is in my Tweecer software.

Shelby

Re: 96 Cobra Maf
 

I've got a MAF Transfer from a LLX3/CDAN4 (96 Cobra) if you are interested. Let me know and I'll export it for ya.

Re: 96 Cobra Maf
 

Just an FYI.
If you are using CalEdit version 1.30a9 to do this be careful because when you export maf curves the maf curve numbers will change from what they originally where to something different. Which in turn will screw the maf curve up....

Re: 96 Cobra Maf
 

Sorry guys for not getting back sooner, but getting ready to go hunting and than taking 10 days off (With only one Elk with 5 guys in the party) and than trying to catch up when I got back, there hasnt been much time.

Well I gave up on useing the MAF transfer from a LLX3. It just wouldnt work. So I worked with what I had, with EA and was able to get Kamrfs to 1.0 + or - .01xx. for idle and cruise. One thing I noticed is my LMBSE is at 13.8. I am going to set up the WB tomorrow and conferm this.

Thanks for the input.