StreetStangs.net
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

StreetStangs.net (http://www.streetstangs.net/forumindex.php)
-   Chassis, Drivetrain, Suspension, Brakes & Tires (http://www.streetstangs.net/forumdisplay.php?f=19)
-   -   99-04 IRS upgrades (http://www.streetstangs.net/showthread.php?t=15838)

QWKSNKE 02-26-2010 02:51 PM
99-04 IRS upgrades
 
So how bad do you think this would be on a mostly street driven IRS setup

http://www.svtperformance.com/forums...steer-kit.html

Kerry you need to buy this and report the results :D

SvoBrown 02-26-2010 03:38 PM
Other than the wheel hop and the loose front steering it drive just fine.
I bet that would be way to stiff for me.

qkjuicedpony 02-26-2010 03:57 PM
Let me tell you about a pain in the ass job those are to do.

rtusnake 02-26-2010 03:59 PM
I had the solid diff bushings in mine, helped out alittle at the drag strip. Didn't really notice anymore noise.

rtusnake 02-26-2010 04:00 PM
Quote:
Originally Posted by qkjuicedpony (Post 200258)
Let me tell you about a pain in the ass job those are to do.
Holesaw ftw. Still sucks to replace them though

QWKSNKE 02-26-2010 04:48 PM
Quote:
Originally Posted by SvoBrown (Post 200257)
Other than the wheel hop and the loose front steering it drive just fine.
I bet that would be way to stiff for me.
Read this..

http://www.svtperformance.com/forums...h-article.html

QWKSNKE 02-26-2010 04:52 PM
Quote:
Originally Posted by qkjuicedpony (Post 200258)
Let me tell you about a pain in the ass job those are to do.
You don't have to, I already know. We replaced the bushings in Thejeanyus's 03 several years ago

Quote:
Originally Posted by rtusnake (Post 200259)
I had the solid diff bushings in mine, helped out alittle at the drag strip. Didn't really notice anymore noise.
Just the diff or everything? Apparently its an 'all or none' deal to see any real benefits.
Seems to me it would make NVH go through the roof but according to several on there you do all and the IRS will operate as it should without killing your back. May consider this for the wife's since all of her bushings probably need replacing anyhow

SvoBrown 02-26-2010 06:58 PM
The price for the complete IRS bushing kit is $595.00. Individual component prices are listed below. Note, as of 6-01-09 we have unfortunately been forced to eliminate the free freight.

That's sounds very high. I didn't pay that much for the irs!!

rtusnake 02-26-2010 08:05 PM
Quote:
Originally Posted by QWKSNKE (Post 200264)
You don't have to, I already know. We replaced the bushings in Thejeanyus's 03 several years ago



Just the diff or everything? Apparently its an 'all or none' deal to see any real benefits.
Seems to me it would make NVH go through the roof but according to several on there you do all and the IRS will operate as it should without killing your back. May consider this for the wife's since all of her bushings probably need replacing anyhow
Just the diff. I know alot of the guys was happy with his kit though. Said nvh wasn't to bad really
Quote:
Originally Posted by SvoBrown (Post 200269)
The price for the complete IRS bushing kit is $595.00. Individual component prices are listed below. Note, as of 6-01-09 we have unfortunately been forced to eliminate the free freight.

That's sounds very high. I didn't pay that much for the irs!!
Thats cause I had a crackhead price on the irs :jester:

QWKSNKE 02-26-2010 08:13 PM
Quote:
Originally Posted by SvoBrown (Post 200269)
The price for the complete IRS bushing kit is $595.00. Individual component prices are listed below. Note, as of 6-01-09 we have unfortunately been forced to eliminate the free freight.

That's sounds very high. I didn't pay that much for the irs!!
Not really, its cheaper than MM.

595 buys an assload of bushings


All times are GMT -6. The time now is 05:10 PM.
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.