StreetStangs.net

StreetStangs.net (http://www.streetstangs.net/forumindex.php)
-   Project Cars (http://www.streetstangs.net/forumdisplay.php?f=35)
-   -   Trans Filter, Cooler & THERMOSTAT install (http://www.streetstangs.net/showthread.php?t=7105)

fireguy50 08-15-2006 10:03 PM

Trans Filter, Cooler & THERMOSTAT install
 
I want peek performace out of my transmission, so I added a "big" cooler years ago. Worked pretty good in the summer, but was too cold in the winter. So I got a bigger cooler and added a 180°F Thermostat from Perma-Cool (part # 1060)

Mounted the Thermostat on the right frame rail under the alternator
It has 2 IN & 2 OUT ports. I blocked the cooler IN port.
Hot fluid comes in the E1 port from the transmission
Cold fluid goes out the E2 port to the above trans filter
Hot fluid goes out the C1 port to the trans cooler
http://fordfuelinjection.com/bronco/...thermostat.gif

Got a bigger cooler now 11 X 11 X 1.5 stacked plate rated to 30,000 GVW.
http://fordfuelinjection.com/bronco/...ans-cooler.jpg
http://fordfuelinjection.com/bronco/...ans-cooler.jpg
http://fordfuelinjection.com/bronco/...ans-cooler.jpg

Got a new filter mount that has 4 side ports, So I don't need any plumbing Tee's now.
1 IN port is for fluid from the Thermostat
1 IN Port is for fluid from the Cooler
1 OUT port send cool / clean fluid back to the transmission
1 OUT port is for the trans gauge temp sender
http://fordfuelinjection.com/bronco/...ans_filter.jpg
http://fordfuelinjection.com/bronco/...ans_filter.jpg
http://fordfuelinjection.com/bronco/...ans_filter.jpg

fireguy50 08-16-2006 02:39 AM

http://fordfuelinjection.com/bronco/...olant-path.gif

Long # LPD4590 (B&M rebox's their stuff)
http://fordfuelinjection.com/bronco/...ng_LPD4590.jpg

Perma-Cool # 1060
http://fordfuelinjection.com/bronco/...-cool_1060.jpg

Perma-Cool # 1791
http://fordfuelinjection.com/bronco/...-cool_1791.jpg

Wix # 51622
http://fordfuelinjection.com/bronco/.../wix_51622.gif

EZ SPEED 08-16-2006 04:02 AM

Nice Work Ryan !! :nice:

Italian LX 08-16-2006 05:48 AM

That's a pretty neat set-up, Ryan. Nice jon on the install, too. :nice:

Sendero 08-16-2006 09:03 AM

What's the big heavy gauge copper for, welder? Generator?

ncontt 08-16-2006 02:49 PM

Quote:

Originally Posted by Sendero (Post 94658)
What's the big heavy gauge copper for, welder? Generator?


guaging from the welding/quick disconnect I would guess it's for a winch setup? :popcorn: ???? Just plug it up and go perhaps?

sweet setup by the way, that's the same cooler I have but mines got the AN fittings on it...scored it on EBAY, LONG= B&M....looks awesome and should do MORE than the trick

coupe 08-22-2006 03:55 PM

Was gonna ask why the cooler was too cold in winter...

then I saw your location. :nono:


All times are GMT -6. The time now is 02:20 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.