StreetStangs.net

StreetStangs.net (http://www.streetstangs.net/forumindex.php)
-   Mod Motor Tech (4.6 & 5.4) (http://www.streetstangs.net/forumdisplay.php?f=18)
-   -   terminator in a fox (http://www.streetstangs.net/showthread.php?t=18419)

blue90lx 08-13-2015 04:51 PM

terminator in a fox
 
Was just wondering if anyone here has made the swap and how hard the it is. Also the wiring how difficult is it. I'm just curious about this . Any info or links would be great thanks

rtusnake 08-14-2015 12:22 AM

The install is straight forward. The wiring isn't to bad if your if your decent with car wiring and reading the wiring schematics. Get the gauges to work is the hardest part imo. A coyote swap is a better swap to me. Just alittle more expensive and the same power n/a.

blue90lx 08-14-2015 08:04 AM

Well I know I can get everything I need for the terminator swap for around $10k. How much more would the coyote swap be? I've looked at the crate motors but they don't come with transmissions or wiring

EZ SPEED 08-14-2015 10:47 AM

just a quick search I found this: look on down the page for manual trans options http://www.hotrodpowersource.com/for...lpackages.html

blue90lx 08-14-2015 01:25 PM

Thanks ez speed that's a very helpful site thanks

rtusnake 08-14-2015 04:09 PM

You can run any trans that would bolt up to a 4.6. If you go auto, you will have to have a mvb or some type of standalone controller for the trans. I'm running a 4r75 with a mvb on my coyote swap.

rtusnake 08-14-2015 04:09 PM

Also you can get a motor from the f150 for around $2500 used. They have alittle less compression and different cams than the mustang motor.

QWKSNKE 08-15-2015 09:36 PM

Thinking of doing a termi in the svo?

blue90lx 08-16-2015 10:42 AM

No I've been out of work due to health problems and been really bored reading up on a lot of different things


All times are GMT -6. The time now is 08:05 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.