HELP Running lean with 50lbs injectors
I have recently went to a set of 50lbs injectors and now running extremely lean. I got the maf recali for the 50's increased fuel preasure to 43. The car run great with 30's and a FMU. I am sure they are 50's. Is there a way to check the maf voltage? and if there is what should the voltage be with the 50's and the recali? Any Suggestion? :banghead:
|
Re: HELP Running lean with 50lbs injectors
recal's loose their accuracy the larger (injector) you go.
What is your dyno numbers? Go back to smaller injectors or use tuning software to get everything sorted out. |
Re: HELP Running lean with 50lbs injectors
Yes I understand the loss cali with the larger injectors. I thought that it would have a problem idling by running rich but with these its running lean thoughtout the dyno pull. I talk to Blake and he runs kinda the same setup with no problem. Is there away to check the maf without sending it in?
|
Re: HELP Running lean with 50lbs injectors
Are you running any kind of tuning software or are you just trying to correct it with fuel pressure? What kind of MAF are you using?
|
Re: HELP Running lean with 50lbs injectors
He's trying to correct through a AFPR and a A9L with no tuning devices. Marc came out to the TMS dyno day, I wish I had gotten the run files from Blake to post up. Maybe I can once Blake gets his internet working again.
Also I think its a Pro-M maf, but unsure as to what model. |
Re: HELP Running lean with 50lbs injectors
what were the dyno #'s
|
Re: HELP Running lean with 50lbs injectors
Quote:
uh oh :shake: You can't do that now if you are at the power level to require that high of an injector (not safely anyways) Time to pay somebody to tune it or to get a tunable setup |
Re: HELP Running lean with 50lbs injectors
Quote:
Right. Is he still running an FMU? Just because he has 50's and the MAF is cal'ed, he still has to have some way to increase the injector pulsewidth(software) or increase the fuel pressure(FMU) as the boost comes on. I'm assuming there is boost involved or you wouldn't need 50's. Only difference between the 30's and 50's is he won't need as much FMU ratio and his base fuel pressure will not have to be as high. |
Re: HELP Running lean with 50lbs injectors
Quote:
|
Re: HELP Running lean with 50lbs injectors
Not running any tuneable software. Have a 75mm pro-m bullet. No longer using fmu have regulator with a 1.1 ratio. BAP?????? I have the dyno sheet I'll try to load.
|
All times are GMT -6. The time now is 05:30 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.