6 pin maf in a fox
Been thing about changing to 42 lbs and new maf. Right now i have a 75mm pro-m with 30lbs and thought about a c&l but the people at Dynospeed racing say I will proably peg the meter and are trying to sell me a big air maf but that involves and new maf wiring harness and and chip beening burt or computer tune on the dyno of coarse more money but is it really worth it? Anyone have any suggestion? Oh this is in a 89 with a 331 stroker holley heads and intake with a vortech s-trim.
|
Re: 6 pin maf in a fox
Get an 80mm for the 42's & you'll be about right. :nice:
|
Re: 6 pin maf in a fox
You can use the 6pin. You can buy a conversion harness, or you can get a harness pigtail and splice it in to your existing harness.
|
Re: 6 pin maf in a fox
The two outer pins will not be used. They are act wires. i suggest calling afm and getting a pro mass air systems 80mm.
|
Re: 6 pin maf in a fox
Pro-m is no longer around sold out or something and a C+L requires a 4 inches of tubing between the maf and air filter that i do not have.
|
Re: 6 pin maf in a fox
Pro-M is out of business but Professional Mass Air Systems is the new company as they bought out most of Pro-M's "stuff"....
|
Re: 6 pin maf in a fox
|
Re: 6 pin maf in a fox
Thanks Ryan.
Also welcome to the site. |
Re: 6 pin maf in a fox
|
Re: 6 pin maf in a fox
Quote:
|
All times are GMT -6. The time now is 09:24 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.