StreetStangs.net

StreetStangs.net (http://www.streetstangs.net/forumindex.php)
-   EEC Management (http://www.streetstangs.net/forumdisplay.php?f=21)
-   -   Just purchased quaterhorse and binary editor (http://www.streetstangs.net/showthread.php?t=16043)

DerekT 04-07-2010 09:22 PM

Just purchased quaterhorse and binary editor
 
Well i recently purchased the Quaterhorse,and the Binary Editor for my 95 GT,so i was just going to see who all on here is or has ran this and get some tips on the does and dont's of tunning my car.I've been doing some research and it seems that one of the biggest reccomendations is to read up as much as possible on it,but i thought i'd just ask around for some helpfull hints on it,this is the first time i've ever messed with anything like this so any and all help is greatly appreciatted.As of now my car is basically stock, but the reason i went ahead and purchased it and installed it was i wanted to get my feet wet with it before i put my aluminum headed 302 in the car.The new motor is a 302 with a set of worked TF TW heads, with an E cam and a 95 Cobra intake, with long tubes an Xpipe and magnaflow mufflers.So if there's anyone that has any experience with this any and all help with it would be appreciatted.
Thanks.
Derek.

SlowJoe 04-07-2010 09:26 PM

there is some guys here that will maybe help you get your feet wet. welcome to the board.

SlowJoe 04-07-2010 09:28 PM

this is something to help a little.

http://www.streetstangs.net/showthread.php?t=13385

DerekT 04-07-2010 09:29 PM

Just purchased Quaterhorse
 
Sounds good, oh and thanks for sending me to this site Joecoupe, i really have enjoyed it, and thanks for the kind welcome.

coupe 04-07-2010 09:43 PM

Dale McPeters will probably respond soon... he has done a good bit of work with the Quarterhorse along with some other Moates products and AEM stand-alones.

DerekT 04-07-2010 09:48 PM

Sounds great, i hope he does because i can definetely use all the help and guidance i can get.

SvoBrown 04-08-2010 03:25 AM

I have some of the moates stuff. J3 chip in the svo. after I got someone to get the tune done it has been flawless ever since. Good stuff!!

93cobra1928 04-08-2010 05:07 AM

eectuning.org is a good place to get info, lots of good tuning
tech there

DerekT 04-08-2010 10:43 AM

Svobrown who did you get to tune your car, and yes EECTunning.org is a good website.

Dale McPeters 04-08-2010 11:29 AM

The main things to get correct on the '95 cars is the maf & injectors.
If you don't then all of you load calculations will be off...

Meaning that the fuel & spark are based on the actual load calculations

What all are you needing help with?


All times are GMT -6. The time now is 12:09 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.