StreetStangs.net

StreetStangs.net (http://www.streetstangs.net/forumindex.php)
-   Tweecer (http://www.streetstangs.net/forumdisplay.php?f=57)
-   -   need help on stratergy fbfg2 trying to disable pats system (http://www.streetstangs.net/showthread.php?t=17494)

2003burplegt 09-05-2011 09:28 PM

need help on stratergy fbfg2 trying to disable pats system
 
just bought a tweecer for my 04 5 speed gt is has a few bolt ons. i just replaced the ecm and i need to disable the pats system on stratergy fbfg2, does anyone have a mild tuned bin file or can someone walk me through the steps... thanks im a noob and plan on doin alot of tweecing once i get my car started

QWKSNKE 09-06-2011 07:08 AM

Waiting on Dale to chime in....

Dale McPeters 09-08-2011 06:59 PM

Lol at Lee...
First thing I would do is email Mike Glover directly to make sure that he has the scalar mapped out in the strategy file. He took it out of some of the later model strategy files if I remember correctly. Anti theft stuff you know...

If it is there it should be under the scaler tab as it is a switch in the binary file...

BIGDATOWN 09-08-2011 07:01 PM

I'm not familiar with the tweecer but if its like Binary editor, when you first open all the spots it should just say pats system and either disable it or put a 0 in the spot. Hope that made some sense.

2003burplegt 09-08-2011 09:16 PM

thanks
 
i found the scaler i was only reading one bank not 2, but i put a 1 in (pats-disable-switch) to disable it when i write this to the eec the fan cuts back off and the odometer registers but the light still blinks and the engine still turns but doesn't crank??? im prob just going to send the ecm to get reflashed

BIGDATOWN 09-09-2011 05:59 AM

try 0 before sending it off.

Dale McPeters 09-09-2011 06:06 PM

1 is on 0 is off just like binary code...
It is like this on every strategy that I have worked with, GM, Ford & Chrysler..

And you should be reading 4 banks on the later model Ford EEC's....


All times are GMT -6. The time now is 07:52 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.