Well i probaly should have posted this earlier but i didnt. last weekend went home and pulled my engine out of our 86, took the oil pan off to change oil pump(kinda low oil pressure 14 lbs at idle) and sure enough bearing pieces on the pickup. granted there are about 10k of hard miles with numerous trips down the track. broke the engine down to bare block and # 8,7,4,3 and back ttwo mains were badly damaged. the rings, pistons and the cylinder walls looked great. dad took it to glenn sheppard to get the cylinder walls lokked at and check the crank. i dunno the statis yet though. if everything goes the way it should i will go home friday and get it all back together
