Quote:
Originally Posted by EHardy1971
Probably broke/collapsed the spring for the pressure valve inside the pump.And like Bad Int said,get a standard volume pump,all a high volume one is going to do is rob horsepower! My recommendation would be a standard volume high pressure one!
|
If you have a stock pan I recomend the standard oil pump. If you have a deep pan, a high volume, I use the FMS high volume pump on mine and the FMS harden steel pump shaft. About the high volume pump robbing hp, that is BS, I have had both of them and did not see any diference going down the track, only I saw was, the standard pump with the deep pan at idle will read low oil pressure, so put back the high volume pump and good oil presure at idle, but this time it is going to be different, I put main bearings King HP 3/4 groove, so it will probably read low oil pressure at idle.
Edgar