StreetStangs.net - View Single Post

86GT · 07-13-2005, 02:42 AM

I am adding support for the ODBII stuff to the EEC Analyzer. I currently am able to log data just like the Tweecer does but through the ODBII connector. The sample rate is not as good as the tweecer but it works.

I am using the ODBII scan tool made by ScanTools.net It works pretty good. I would eventially like to log any and alll parameters. Some of these parameters (PID's) are in the enhanced section and require a different addressing scheme. The ones I listed above are standard ones and the ones you found are the Enhanced PID's.

07-13-2005, 02:42 AM	#6
86GT Member Join Date: Mar 2005 Location: Sacramento California Posts: 449	Re: ODBII PID parameter I am adding support for the ODBII stuff to the EEC Analyzer. I currently am able to log data just like the Tweecer does but through the ODBII connector. The sample rate is not as good as the tweecer but it works. I am using the ODBII scan tool made by ScanTools.net It works pretty good. I would eventially like to log any and alll parameters. Some of these parameters (PID's) are in the enhanced section and require a different addressing scheme. The ones I listed above are standard ones and the ones you found are the Enhanced PID's. __________________ EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more.