StreetStangs.net - View Single Post

gtcpa · 08-10-2008, 01:32 PM

You don't have to get an expensive can, you can use an in-line filter also. See the picture of the engine in the "new from shelby county" posting in the welcome forum.
I used a oil separator filter from a hardware store that fit perfect in my line and separates the oil very good.
This is the same type of filter that Steeda sells, but you can do it yourself for much less.

08-10-2008, 01:32 PM	#2
gtcpa Member Join Date: Jul 2008 Location: Shelby County, Alabama Posts: 63	You don't have to get an expensive can, you can use an in-line filter also. See the picture of the engine in the "new from shelby county" posting in the welcome forum. I used a oil separator filter from a hardware store that fit perfect in my line and separates the oil very good. This is the same type of filter that Steeda sells, but you can do it yourself for much less. __________________ 2008 Mustang GT500 Coupe Torch Red w/White Stripes Polished TVS Ford Racing Supercharger upgrade 2.6" Pulley with Evolution 93 Octane Tune JLT Carbon Fiber Cold Air Intake AFCO Heat Exchanger Upgrade EVO Aluminum 900 hp rated 1-Piece Driveshaft Borla Stinger "S" Type Exhaust Shelby Billet 6-speed Short Shifter Ford Racing 3.73 gears J&M Billet Lower Control Arms & Adj. Upper Control Arm CCW SP500 Wheels 18x9.5 & 18x11 Toyo TQ Drag Radials 315/35/18 CDC Sequential Tail Lights