[QWKSNKE]

From my 'Edgar' notes.

If this a stud mount rockers this is what you do. Turn the motor slowly until you see the exhaust valve to start opening, stop, go to the intake valve tight it until there is no lash, then go 1/4 of a turn then lock the poly lock. Now turn the motor again, now you are going to see that the exhaust opens completely and then the intake starts to open, now let the intake valve open completely but as soon you see it to start closing, stop, now go to your exhaust valve do the same thing as the intake, then do all of them like that and you are set.


Edgar