StreetStangs.net - View Single Post - trying to enter my cam info into EEC Analyzer

waypastcrazy · 08-26-2011, 07:20 PM

Looks to me like it is requiring the duration @ .050 and under those the duration @.006.

Intake dur@ .006 275
Exhaust dur@ .006 270
look to the right of the input columns and you can see the
.050 then under it the. 006.
If you look at your cam spec card it has it listed like this
duration. 006 tappet lift intake 275
Tappet lift exhaust 270
hope this helps

08-26-2011, 07:20 PM	#4
waypastcrazy ADDICTED TO SMALL BLOCKS Join Date: Jan 2007 Location: lookout mt Posts: 1,757	Looks to me like it is requiring the duration @ .050 and under those the duration @.006. Intake dur@ .006 275 Exhaust dur@ .006 270 look to the right of the input columns and you can see the .050 then under it the. 006. If you look at your cam spec card it has it listed like this duration. 006 tappet lift intake 275 Tappet lift exhaust 270 hope this helps __________________ http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 08-26-2011 at 09:02 PM.