|
Car is now running like a Cadillac, damn this thing is touchy. The converter is to loose, so has to be sent back to PTC so it can be tighten up. I decided to lower the boost to 7psi, so it will not split the block. Adam and Matt has it in a very safe tune. We only had a small window to tune due to the converter would not hold load at the lower rpms and it will shoot up to 5000 rpm and that's when the converter will put the load on the motor. So in a Mustang Dynamometer (which reads lower hp and tq) and a loose converter, and 7lbs of boost, 454.5hp and 454.2 ft lbs!! This is through the new AOD silver fox transmission. It is a blast to drive. Here is the Dyno sheet. Thanks again Adam at Popsracing.com from N.Y. and Matt at Pro Masters here in Enterprise, this was live on the Dyno.
Edgar
This is done with a quarterhorse/moats software. If anyone with EEC fox that needs tuning, this is the guy to do it. Pro masters, Enterprise, AL. Not only he can tune this he can tune the newer Mustang models with SCT and he can do some mean tuning on Diesels trucks, Ford, Duramax, Dodge...
|