10-09-2007, 08:30 PM | #1 |
Junior Member
Join Date: Oct 2007
Posts: 2
|
distributor problem
i have a 94gt,which i bought a complete engnine for on ebay.i'm having a problem with the msd distributor that came with the engine.is their any way to modify either the harness or the distributor to make it work.i already tried running the wires from my module which is seperate from my distributor,to the distributor i have which the module is part of the distributor? any advise would be appreciated.(the engine i beleive is from a 93gt.
|
10-09-2007, 08:33 PM | #2 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
just reuse the distributor from your old motor.the one you have wont work
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
10-10-2007, 10:52 AM | #3 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
they are two completely different distributors!(if you want to sell the MSD one,let me know!)
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
10-11-2007, 09:07 PM | #4 |
Junior Member
Join Date: Oct 2007
Posts: 2
|
make me an offer.its an msd brand new
|
10-24-2007, 07:34 PM | #5 |
Junior Member
Join Date: Feb 2006
Location: Montgomery, AL
Posts: 21
|
Are you running an aftermarket ignition box? Which MSD dizzy do you have (part number)? I ran the standard EFI MSD dizzy with an MSD 6AL ignition box without any problems on my 95 Cobra. It was simple to wire using an MSD harness that is offered. Hope this helps!!
Wayne |
|
|