compute question?

[b-blown]

swapping from n/a to turbo set-up using built bottom end from turbocoupe don`t have a computer yet thinking of going bamafuel how hard is it to set up etc. or would a stock computer handle a t70 it`s going to be a track car mostly or should I go sds any thoughts appreciatted this is first attempt at big turbo 2.3

[SvoBrown]

Originally Posted by b-blown

swapping from n/a to turbo set-up using built bottom end from turbocoupe don`t have a computer yet thinking of going bamafuel how hard is it to set up etc. or would a stock computer handle a t70 it`s going to be a track car mostly or should I go sds any thoughts appreciatted this is first attempt at big turbo 2.3

Make sure you have the injectors that will give you the fuel to do it. I would go to the after market computer first thing. There is just to much power that can be found that way. The svoca.com has a write up on the bamafuel. Save your money and do it right the first time. SdS is a good system. Read up on them and decide. I'm still saving up for a BigStuff3.

[b-blown]

thanks for the advice am thinking Iwill use sds as I am in canada less aggravation for shipping and it doesn`t look too difficult canI hook it up and run base program and just set blow offs to dump at low pressure until I get it to a good tuner cause I live in canada north of sault michigan it`s over 300 miles to the closest tuner that I know of