11-08-2005, 10:11 PM | #1 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
ATTN: Anyone with MSD-type RPM Modules
I've looked all over on the web and can't seem to find a cross-reference for the resistance value of each RPM module.
I have the 3000 series and a couple of the 6000 series and was able to measure the resistance with an ohm meter, but I need to know all the other series resistances. What I have found is that it seems like the values are linear within a particular series (ie. the 3000 sries are all seperated by 160ohms); however, it doesn't appear that they are linear across the entire range. The modules I have go from 1890ohms (3000rpm) to 2530ohms (3800rpm), but the 6000rpm module measures 4570ohms which doesn't graph out linearly. The bottom line is, if you have any RPM modules and access to an ohm meter, I would realy appreciate feedback as to what the resistance value is for each of the ones you have. Thanks.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
11-08-2005, 10:16 PM | #2 |
Mine's bigger...
|
Re: ATTN: Anyone with MSD-type RPM Modules
Just buy the pill packs cheap ass
__________________
323rwhp | 320rwtq - 4VNA 12.13 @ 113.36 | 1.63 60' |
11-09-2005, 02:56 AM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: ATTN: Anyone with MSD-type RPM Modules
|
11-09-2005, 02:57 AM | #4 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: ATTN: Anyone with MSD-type RPM Modules
Brian. I still have that pack for the 6AL at the house
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
11-09-2005, 04:46 AM | #5 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: ATTN: Anyone with MSD-type RPM Modules
Quote:
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
11-09-2005, 04:59 AM | #6 | |
Friends
Join Date: Dec 2004
Posts: 1,645
|
Re: ATTN: Anyone with MSD-type RPM Modules
Quote:
Damn Brian, get the didgital box I have 4 adjustable, the only thing you do is move it to the degrees you want it to retard, don have to worry about chips at all. Remember this, you do it yourself, it might work fine, but when you don't expect it, the damn thing does not work and you have melt down half the track, hum.... Stop been so cheap, BITCH!!! Edgar |
|
11-09-2005, 05:16 AM | #7 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: ATTN: Anyone with MSD-type RPM Modules
Quote:
. . . well, no more than anything else I have done on my car.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
11-09-2005, 10:38 PM | #8 |
You can call me mister.
Join Date: Jan 2005
Location: Plenty recovered.
Posts: 3,518
|
Re: ATTN: Anyone with MSD-type RPM Modules
at all of y'all.
|
11-10-2005, 02:26 PM | #9 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: ATTN: Anyone with MSD-type RPM Modules
So, no one has access to any RPM modules and an ohm meter?
Lee was able to hook me up with the 6000 series; I'd like to get the info on the 4000 and 5000 series. Even if you only have 1 or 2 from that range it would help.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
11-10-2005, 02:57 PM | #10 |
Super Moderator
Join Date: Dec 2004
Location: on the water
Posts: 1,280
|
Re: ATTN: Anyone with MSD-type RPM Modules
I have some but they are the 6000 series.
__________________
2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles |
|
|