08-31-2006, 01:55 PM | #1 |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
head porting?
kerry or someone post how they ported their heads,
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
09-06-2006, 07:02 AM | #2 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Boport on turboford.org has been making power out of these for a while now.
I spent about 30 hours on my head and its stilll nothing compaired to the work he does. Smooth and ease the turns. Polish the valve area and the chamber. Stronger valve springs and 3 angle valves. Do most of the work on the exhaust side. I will try to get some pics in the next few days.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
09-06-2006, 07:13 AM | #3 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
09-06-2006, 07:24 AM | #4 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
I got to watch what I say from now on.
http://www.sa-motorsports.com/diyport.shtm Lots of good info here. Its all about flow in the valve area. tight turns and edges make drag that slows down the air travel. This will be my next buy I hope. Rapido 2.3L Turbo Aluminum Cylinder Head http://rapidogroup.com/newprod.htm#cylinderhead
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
09-06-2006, 10:24 AM | #5 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
That's a nice piece. But $1149 bare?!?
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
09-06-2006, 11:07 AM | #6 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Yes, High price and still has to be sent out to be ported to flow better than the iron head. Weight loss on top of the engine is a plus.
Thats why I still have 4 iron heads in my shop as backups.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
09-06-2006, 11:54 AM | #7 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
09-06-2006, 01:57 PM | #8 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
Here is a few pics of one of the 2 i ported for my old 2.3 this one was cracked.I have some close ups of one of bo ports heads that i had.Really don't know about posting them because its his work.I would probly take the head and have the exhaust ports milled first.Doing that it is a lot less work.
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
09-06-2006, 03:45 PM | #9 | |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
Quote:
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
|
09-06-2006, 06:27 PM | #10 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
here is to of boports.If i was going to pay someone it would be him.
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
|
|