interesting bb build

waypastcrazy · 03-18-2009, 06:23 PM

I thought this is a good big block build with street heads.

Quote:

557 build
4.440 bore x 4.5 stroke D1 block Cat 4 bolt billet caps
4340 forged Scat crank from Adney Brown
4340 6.8 length Eagle H beam rods
Flat top BRC pistons
Comp cams solid roller 307-324 adv. 278-286 @ .050 with .785-.778 lift On a 111 sep
Ported victor with dom. flange1150
Quick fuel carb tuned buy Phillip Oakley
TFS streets ported by Charlie EvansDanny
B belt drive on loan by Lem Evans for testing on dyno
Moroso fox pan and pick up
Kasse oil pump
2 1/8 th primary x 4 inch collector Kooks headers used from Alan Mackie

Rpm TQ HP Oil pres.
4500 732 627 74.6
4600 745 652 74.6
4700 750 671 74.4
4800 753 689 74.3
4900 752 702 74.3
5000 750 714 74.3
5100 748 726 74.2
5200 745 738 73.9
5300 742 749 73.3
5400 742 763 73.2
5500 741 776 72.7
5600 741 790 71.8
5700 740 803 71.5
5800 739 817 71.4
5900 736 827 71.4
6000 733 838 71.7
6100 726 844 72.4
6200 723 853 72.7
6300 715 858 73.1
6400 706 860 73.7
6500 696 861 73.7
6600 682 857 72
6700 670 854 71.4
6800 657 851 69.5
6900 638 839 68

First night at track 1/8 th mile
5.81 @ 119.76 mph with a 1.31 60 ft
3000 lb 86 Mustang power glide , 4.10 gear 28 x 10.5 MT drag slicks , ladder bar w, double adjustable coil overs. 8 inch converter was not capable of holding the torque, it blew through it and I have a 9 inch ready to go in this week.More info coming................Blake

QWKSNKE · 03-18-2009, 08:22 PM

Clyde,
I cleaned up post so it was a little more readable (it was all jumbled together)

Although it is not a small block, I am going to move to the pushrod room

waypastcrazy · 03-19-2009, 03:43 AM

Quote:

Originally Posted by QWKSNKE

Clyde,
I cleaned up post so it was a little more readable (it was all jumbled together)

Although it is not a small block, I am going to move to the pushrod room

thx. Its hard to work with this blackberry. On the road it don't want to cooperate sometimes when pasting thx lee.

QWKSNKE · 03-19-2009, 06:43 AM

Quote:

Originally Posted by waypastcrazy

thx. Its hard to work with this blackberry. On the road it don't want to cooperate sometimes when pasting thx lee.

trust me. i know

coupe · 03-19-2009, 07:16 AM

Just plain rowdy.

waypastcrazy · 03-19-2009, 08:54 AM

1/4 mile 9.06 @ 147.84 mph with tire spin. Can't wait to see it dialed in. Any of you guys know blake from shelbyville tn?

03-18-2009, 08:22 PM	#2
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Clyde, I cleaned up post so it was a little more readable (it was all jumbled together) Although it is not a small block, I am going to move to the pushrod room __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

03-19-2009, 07:16 AM	#5
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Just plain rowdy. __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

03-19-2009, 08:54 AM	#6
waypastcrazy ADDICTED TO SMALL BLOCKS Join Date: Jan 2007 Location: lookout mt Posts: 1,757	1/4 mile 9.06 @ 147.84 mph with tire spin. Can't wait to see it dialed in. Any of you guys know blake from shelbyville tn? __________________ http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS