Kenne Bell 86-93 and 94/95 Differences

RedSuperRanger23 · 01-10-2012, 11:46 PM

I have found a used Kenne Bell setup for an 86-93 5.0 and would love to be able to use it on my 94, but I can't really find what the difference in the 2 kits are. I'm probably going to give Kenne Bell a call tomorrow morning when I get off work if I cant find an answer somewhere tonight.

BIGDATOWN · 01-11-2012, 08:12 AM

Main difference is snout length. 94-95 accessories sit closer to the motor

QWKSNKE · 01-11-2012, 10:13 AM

Quote:

Originally Posted by BIGDATOWN

Main difference is snout length. 94-95 accessories sit closer to the motor

+1.....

rtusnake · 01-11-2012, 05:50 PM

It's a good deal if it's the same kb I seen

EHardy1971 · 01-11-2012, 07:00 PM

There's also the difference in upper intakes, so the plumbing would be different. You could put a Fox type upper on it, but it would take a bit of modifying.

BLOWN95GT · 01-11-2012, 07:30 PM

Quote:

Originally Posted by EHardy1971

There's also the difference in upper intakes, so the plumbing would be different. You could put a Fox type upper on it, but it would take a bit of modifying.

kenne bell replaces the upper intake. Is it a 2.1 blowzilla? Is it for a stock or gt40 lower intake?

BIGDATOWN · 01-11-2012, 07:49 PM

If its the one i'm thinking of...its for both intakes and its the old 1.7L

EHardy1971 · 01-11-2012, 08:46 PM

Quote:

Originally Posted by BLOWN95GT

kenne bell replaces the upper intake. Is it a 2.1 blowzilla? Is it for a stock or gt40 lower intake?

You're right. I was thinking about that old BBK blower kit they had back in the day that used an offset Eaton M90.

EHardy1971 · 01-11-2012, 08:49 PM

Quote:

Originally Posted by BIGDATOWN

If its the one i'm thinking of...its for both intakes and its the old 1.7L

It can't be for both lower intakes. They have different runner ports and mounting locations.

RedSuperRanger23 · 01-11-2012, 09:21 PM

This kit comes with both the adapters for the stock manifold and one for the GT40. Unfortunately its the 1.5L kit. I may still get it anyway.

01-10-2012, 11:46 PM	#1
RedSuperRanger23 Gizmo Join Date: Jul 2006 Location: Gardendale, Al Posts: 272	Kenne Bell 86-93 and 94/95 Differences I have found a used Kenne Bell setup for an 86-93 5.0 and would love to be able to use it on my 94, but I can't really find what the difference in the 2 kits are. I'm probably going to give Kenne Bell a call tomorrow morning when I get off work if I cant find an answer somewhere tonight. __________________ 94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic

01-11-2012, 05:50 PM	#4
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	It's a good deal if it's the same kb I seen __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")

01-11-2012, 07:00 PM	#5
EHardy1971 Trunk Monkey Join Date: Jun 2007 Location: Home Posts: 5,708	There's also the difference in upper intakes, so the plumbing would be different. You could put a Fox type upper on it, but it would take a bit of modifying. __________________ Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS

01-11-2012, 09:21 PM	#10
RedSuperRanger23 Gizmo Join Date: Jul 2006 Location: Gardendale, Al Posts: 272	This kit comes with both the adapters for the stock manifold and one for the GT40. Unfortunately its the 1.5L kit. I may still get it anyway. __________________ 94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic

01-11-2012, 08:12 AM	#2
BIGDATOWN Senior Member Join Date: Aug 2010 Posts: 221	Main difference is snout length. 94-95 accessories sit closer to the motor

01-11-2012, 07:49 PM	#7
BIGDATOWN Senior Member Join Date: Aug 2010 Posts: 221	If its the one i'm thinking of...its for both intakes and its the old 1.7L