12-05-2007, 09:13 AM | #1 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
91 lx vs 86 coupe?
Hey guys just wondering what weight savings I might get swapping my 429 and tub k member out of my 91 fully dressed lx into my 86 coupe with a stripped interior. also what are your opinions on it should i or not. all opinions welcome thx. to many projects and to many decisions?????
|
12-05-2007, 10:54 AM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
I don't see there being any significant weight savings
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
12-05-2007, 01:37 PM | #3 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
If it's for a race car...the savings will moslty be in the gutted interior and tubular frontend. The 429 counters that though.
Unless the 91 is a hatch(?) Then you may save a couple hundred lbs.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
12-05-2007, 03:03 PM | #4 |
Im gonna show her my...
Join Date: Dec 2004
Location: Somewhere providing FREE tech support.
Posts: 4,269
|
Wow, that thing will be uber nose heavy!
__________________
I heard it on the internet, so it must be true. "I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent "An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein "Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown |
12-05-2007, 03:13 PM | #5 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
Do it....it would be a few pounds and you need all you can get
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
12-05-2007, 03:51 PM | #6 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
every 100 lbs drops your ET by 1/10 (or so they say)
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
12-05-2007, 06:46 PM | #7 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
swap
the 91 lx is a hatch the 86 is a coupe thx
|
12-05-2007, 06:49 PM | #8 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
swap
|
12-05-2007, 08:10 PM | #9 |
Nothing new here
Join Date: Dec 2004
Location: Senoia, GA
Posts: 2,990
|
I would do it.
Is it going to be a primary strip car? If so, remove the melt mates under the carpet, there is a hyge and heavy mate under the dash to the firewall, get ride of this too. I am assuming your going carb, so remove all the heavy injection realated stuff, and gut as much of the wiring and other stuff as you feel comfortable doing. Also get ride of the heavy steel bumpers, I belive 79-82 4 cyl had aluminum ones, try and find on of those, or try to go with a composite bumper off of the '87 up cars. On my '85 the car wieghs 2850 with 5 gallons of fuel. Remember this is a '85 GT (hatch), with a 302 steel head motor, and still has the factory front susepension and big brakes. Forgot to add that I have a full roll over cage of 1 3/4" DOM and a 22 gallon fuel cell with full bracing as well. I would think you should get the wieght down to 3000 lbs without to much work, do you have aluminum heads?
__________________
1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS Last edited by Craig K.; 12-05-2007 at 09:07 PM. |
12-05-2007, 08:12 PM | #10 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
my 89 hatch with an aluminum headed/EFI motor and a 5 speed weighs 2780 without me in it
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
|
|