10-04-2006, 10:00 AM | #1 |
Senior Member
Join Date: Aug 2006
Location: Gadsden, AL.
Posts: 290
|
Throttle Body & Spacer? 65 or 70mm?
Hi, just a question! I have a 93 GT. It has a new typhoon upper & lower intake. I am looking at TB's and spacers! What is the difference in HP and performance from a 65mm TB and a 70 mm TB. Reason: Found a great deal on a 65 mm, but was looking for 70 mm. If there isn't allot of difference between them, then I would rather go the better deal route, for money sake! Thanks! Gonzo
|
10-04-2006, 10:12 AM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
If you are mostly stock (heads & cam) then I would do the 65mm unit.
|
10-04-2006, 12:01 PM | #3 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
65mm TB has alot of potential. Not much difference to a 70 for a street car.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
10-04-2006, 01:35 PM | #4 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
I agree with the above. You'd have to have some really good heads and a healthy cam to see any difference with the 70mm. You should be fine with the 65mm. . . especially if you can get a good desal on it
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
10-04-2006, 02:06 PM | #5 |
pro-jackstand racer
|
x 4
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
10-07-2006, 01:56 PM | #6 |
Senior Member
Join Date: Aug 2006
Location: Gadsden, AL.
Posts: 290
|
Thanks Guys! I have decided to go with the 65!
|
|
|