|
09-15-2011, 10:57 PM | #1 |
pro-jackstand racer
|
first datalog of new turbo combo
got a log of an idle situation....I'm trying to get this dialed in. I realized I messed up and didn't datalog some parameters I should have...I'm going to try and get another tomorrow with all the right things in the payload but until then...if anyone can take a look at this and give me some ideas I would appreciate it......It 'looks' like idle AFR is hitting 18 and sometimes 19!!! YIKES!!!!
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
09-15-2011, 10:57 PM | #2 |
pro-jackstand racer
|
apparently I can't post a datalog... since they're CSV. files hmmm
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ Last edited by ncontt; 09-15-2011 at 11:00 PM. |
09-16-2011, 09:18 PM | #3 | |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Quote:
I will be up that way this coming week going to Bob Kurgans shop if I have time I will see if I can swing by...
__________________
'14 Dodge Challenger SRT8 392 6-speed |
|
09-17-2011, 03:21 PM | #4 | |
pro-jackstand racer
|
Quote:
I think something was up with the computer (A9P) so I swapped in a C3W I had laying around. I will try to see if I can get a log tomorrow.... I'll see if I can attach it as something else. Brad
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
|
09-21-2011, 10:18 PM | #5 |
pro-jackstand racer
|
still trying to get this going, I haven't had much time to work on this and things are still hokey with the AFR in the 15-17's!!!!! Commanded is around 13 and some change, I think...SOOOOOO I'm thinking I need to get it some more fuel???
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
09-22-2011, 10:17 AM | #6 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
Make sure you don't have a vac leak. Getting the LAMBSES to match what the WB is seeing is definitely first.
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
09-22-2011, 08:29 PM | #7 |
pro-jackstand racer
|
ya, that's what I've been reading about...just trying to figure out what to adjust to get my AFR (15-17) to match the LAMBSE of 12-13
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
09-23-2011, 05:13 AM | #8 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
One other thing, make sure you don't have an exhaust leak as it will give false readings too. Is the AFR you are seeing on the gauge or in EA? If it's in EA make sure you have the offset set correctly for the type WB you are using.
If all that checks you can either adjust the fuel table or the MAF curve to get it to matche commanded AFR. Oh and be sure you force open loop while doing all of this and clear KAMREF.
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
09-23-2011, 07:08 AM | #9 |
pro-jackstand racer
|
I've got a LC-1 wired into the computer (eec) through the pin for the egr, and I've also got it where I can just use a serial cable. I'm viewing all this in BE and EA.
There is a SMALL and I mean small exhaust leak on the PS (one of header bolts is stripped out and I couldn't get it to seal ALL the way. Hopefully that wont make a HUGE difference in the AFR. The other thing I was thinking about was when I set up the LC-1 it has where you can set it for GAS (14.7) or E-10 (14.08)....and I set it for 14.08 cause on almost ALL the pumps around here they state that it "may contain up to 10%ethanol)....Am I wrong by putting that in that field? (14.08) I'm going to try and load a tune with it set to 14.7 and see what difference that makes.
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
09-23-2011, 10:10 AM | #10 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
There are several good threads on eectuning that talk about setting it to E-10 personally I don't see the need on pump gas because the blend changes a couple of times a year and you never really know.
IMO the exhaust leak even though small will be an issue simply because you have no way of knowing how much oxygen it's letting in the exhaust stream and how much of it is saturating the WB. As it goes through several heat cycles this amount will change. An exhaust leak never gets better on it's own only worse over time. You said you have the WB tapped into the EGR pin, is it on the ECM itself or are you tapped at the other end? It really needs to be at the ECM so that the signal doesn't degrade from resistance due to wire length.
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
|
|