|
06-26-2006, 02:59 PM
|
#1 |
|
Senior Member
Join Date: Dec 2005
Location: Illinois
Posts: 173
|
Whata think of this cam??
I'm picking up a D.S.S. Pro Bullet 306 that has this cam in it already. I'm going to run it with my Vortech S-Trim , Snow Meth & a small NOS shot. (50 or 75). This looks to be a nice cam for a charger but I have not had any experience with Comp Cams.. Whata guys think??..
Comp Cam Part# 35-306-8 Grind# 284H-R14 Ser# QA3776 Valve Adj. GRS valve lift int .533 exh .544 Duration @ .006 tappet lift int 284 exh 290 valve timing open close at .050 int 2btdc 42abdc exh 53bbdc 3-atdc These specs are for cam installed@ 110 intake center line Duration @ .050 intake 224 exhaust 230 Lobe lift .3330 .3400 Lobe seperation 114 Thanks, Carl |
|
|
|
06-26-2006, 03:57 PM
|
#2 |
|
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Re: Whata think of this cam??
Whooo! It's gonna be nasty!
 The blower and nitrous will be awesome. It'll be a little rowdy in a 306, but would sure be sweet in a 347.  What heads you using with that?
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
|
|
|
|
06-26-2006, 05:56 PM
|
#3 | |
|
Senior Member
Join Date: Dec 2005
Location: Illinois
Posts: 173
|
Re: Whata think of this cam??
Quote:
The RPM's from my other post.. http://forums.qwiksnake.com/showthread.php?t=6662 
|
|
|
|
|
|
06-26-2006, 06:15 PM
|
#4 |
|
Senior Member
Join Date: Jan 2006
Location: Looking for more ways to add BOOST
Posts: 167
|
Re: Whata think of this cam??
Those specs are nearly identical to a BENNETT blower grind that we run in some of our cars. It is a SWWWEEET cam for boost and nitrous or both. Have fun.
__________________
Hauling A** on Pump Gas !!!!! 
|
|
|
|
|
06-28-2006, 11:39 AM
|
#5 |
|
Senior Member
Join Date: Dec 2005
Location: Illinois
Posts: 173
|
Re: Whata think of this cam??
Sounds like a winner.. Thanks guys..
|
|
|
|
 |
|
|
Linear Mode
