12-12-2009, 04:14 PM | #1 |
marlboro man
Join Date: Apr 2008
Posts: 373
|
Darkside's 89 Notch
Well, after looking around, I have finally got into another Mustang.
Found this on the other side of town. Right now, it's just a roller. No engine/Trans Front clip came with it, just isn't pictured. Red interior- will be the first thing to go I also have a few parts that came with it which will be for sale soon. Well, here are the only pics I have at the moment. The notches that are cut out of the bumper and up on the firewall were for Turbo related parts, so that will need to be fixed, but it's the only real metal work that the car needs.. Not too bad for 500 bucks, clean clear title, what yall think?
__________________
|
12-12-2009, 04:29 PM | #2 |
magnaflow lover
Join Date: Nov 2009
Location: pisgah al
Posts: 150
|
looks good best of luck!
__________________
97 f150 lariat excab tow rig 93 mustang gt under construction |
12-12-2009, 06:26 PM | #3 |
marlboro man
Join Date: Apr 2008
Posts: 373
|
Thanks. Those parts you have will be part of this project, as soon as i come get em lol
__________________
|
12-12-2009, 07:39 PM | #4 |
Senior Member
Join Date: Dec 2006
Location: behind Skillet
Posts: 1,356
|
nice car, especially for $500
|
12-12-2009, 08:02 PM | #5 |
marlboro man
Join Date: Apr 2008
Posts: 373
|
I'm not draggin ass on this project, i got a engine and trans lined up to get, and a long list of other stuff.
First thing is the interior, gonna get all that done first. That red interior has to go. I figure i will paint most of it. Need to figure out what a lot of the wiring is on the floor under the carpet, or where the carpet should be. I know the car is wired for a trunk mount battery, so some of the cables are for that. Also, i need to figure out which computer I need for the 5 speed set up, if it matters, i think the A9L is the best computer for the fox? need to research that. Right now, my main focus is getting the front clip back on, and the interior done. I plan to start work on that tomorrow morning.
__________________
|
12-13-2009, 09:18 AM | #6 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
Nice find
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
12-13-2009, 09:59 AM | #7 |
marlboro man
Join Date: Apr 2008
Posts: 373
|
Going today to pull the seats and other stuff out of it, will snap pics in case someone may want to buy em.
__________________
|
12-13-2009, 10:01 AM | #8 |
marlboro man
Join Date: Apr 2008
Posts: 373
|
Don't remember if i already posted this or not, but the car has a B&M shifter for C4-C6 in it that i will be selling as soon as i get it pulled out.
__________________
|
12-13-2009, 10:18 AM | #9 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
Nice find! what kind of shifter?
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
12-13-2009, 10:51 AM | #10 |
marlboro man
Join Date: Apr 2008
Posts: 373
|
Right now, all i know is that it's a B&M for C4-C6 and can work on AOD with a different cable or some shit, but i won't be needing it at any point because i will be putting a 5 speed in.
When i get it out of the car, i'll look around on it, bound to be a part # or something..I'll let you know
__________________
|
|
|