07-31-2006, 03:53 AM | #1 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
12 Tooth Crank Trigger wheel for AEM
Well time for some more testing with the AEM unit.
Hope to be able to give this a try sometime this fall. It is a 12 tooth crank trigger wheel setup like Mike at toohighpsi.com used to sell. Finally found a guy in MN that had a few that he had made so I bought two just in case that I destroy one etc. etc. Going to have to mill about 1/8" off of mounting ring of dampner for it to work. A few pictures...... Last edited by Dale McPeters; 08-14-2006 at 06:55 PM. |
07-31-2006, 04:45 AM | #2 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Re: 12 Tooth Crank Trigger wheel for AEM
I have a 1,36 wheel that I am going to use on my next engine. On yours how does it know where tdc is? All the teeth look the same on you wheel.
|
07-31-2006, 04:56 AM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: 12 Tooth Crank Trigger wheel for AEM
I would guess by the degrees I see engraved on the shiny thing
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
07-31-2006, 05:08 AM | #4 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: 12 Tooth Crank Trigger wheel for AEM
Quote:
|
|
07-31-2006, 05:09 AM | #5 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: 12 Tooth Crank Trigger wheel for AEM
oops
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
07-31-2006, 06:25 AM | #6 | ||
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: 12 Tooth Crank Trigger wheel for AEM
Quote:
the pulse. By the way from what I have found so far the 30-1400 box should be able to run an SVO 4 cylinder.... Quote:
|
||
|
|