09-17-2009, 01:53 PM | #1 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
anybody got a cam?
anybody got a realy lumpy cam for a 302. i would like new with lifters but im not real picky the car is supposed to have a f-303 in it but im not sure if it does post up what ya got. just wanting to change things up a lil. wanting to run it mostly n/a but gonne be givin it the jug soon
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
09-17-2009, 03:06 PM | #2 |
Administrator
Join Date: Dec 2004
Location: Huntsville, AL
Posts: 14,774
|
More cam probably won't do anything other than kill your low end unless you have the heads and intake to support it...just throwing that out there.
__________________
1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI |
09-17-2009, 04:11 PM | #3 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
just lookin for a lil more thump. ive already pullin out the motor and having to separate everything so might as well try a diffrent cam to see the results.planing something big involving so non/na stuff so was wanting a nitrous freindly cam and if this actually is an f-303 i might leave it but, i dont belive it is.
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
09-17-2009, 04:52 PM | #4 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
09-17-2009, 09:39 PM | #5 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Really need to think about combos before throwing $200-$300 cams in
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
09-17-2009, 10:37 PM | #6 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
well this is whats the deal is i cant afford to do everything at once i know i want a higher reving combo which is gonna mean taller intake than what i have(victor,funnelweb,ect,) i know the cam isnt going to help much.....right now. but, if i have the chance to do a good cam now why not.because im not just gonna throw a cam in and say...ok im done. i just cant afford to go buy everything to rebuild this motor buy al;uminum heads, better intake,nitrous, and everything lol or the car wouldnt have been sitting this long. thats all im saying i know the shorterm benifits arent that great. but, the long ones i can see turning out pretty good.....makin any sense?
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
09-17-2009, 11:49 PM | #7 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
Man I need to build a pushrod
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
09-18-2009, 03:37 AM | #8 |
Senior Member
Join Date: May 2008
Location: Sand Mountian
Posts: 180
|
I got a BIG solid roller (.690 lift) that'll give you that thump you want!
__________________
|
09-18-2009, 05:21 AM | #9 |
Friends
Join Date: Dec 2004
Posts: 1,645
|
You have to consider that with the lumpy cam comes the springs to support it. Just putting a cam in that is pretty big the only thing is going to do is break springs and then drop a valve and motor is done for sure. I have a big crower Hydr roller. 522/542 lift and .250/.262 at .050 with a 114 lobe separation. This is for supercharger/Nitrous.
Edgar |
09-18-2009, 06:54 AM | #10 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|
|