Stall issue with 03 Mach 1

redhorse · 11-15-2010, 11:11 AM

I can't make this happen and it only happens occasionally.

Most of the time when turning left from a stop. Ease out of the clutch into the throttle. The car starts to roll and then stalls, with dashes appearing on the odometer. Coast to a complete stop, turn the switch completely off and start the engine. Engine starts with no problem at all and the car runs fine. Like I said at first, it mainly happens when starting and making a left turn. It has happened twice when starting in loose gravel in a straight line.

Tac Bear put his Diablo Programmer on it and it showed no codes, any ideas.

When making a U-turn or a hard left turn at times the car wants to stumble under acceleration. I have been told that it is possibly a wheel sensor that is going bad.

11-15-2010, 11:11 AM	#1
redhorse Senior Member Join Date: Jul 2005 Location: Trussville, Al Posts: 819	Stall issue with 03 Mach 1 I can't make this happen and it only happens occasionally. Most of the time when turning left from a stop. Ease out of the clutch into the throttle. The car starts to roll and then stalls, with dashes appearing on the odometer. Coast to a complete stop, turn the switch completely off and start the engine. Engine starts with no problem at all and the car runs fine. Like I said at first, it mainly happens when starting and making a left turn. It has happened twice when starting in loose gravel in a straight line. Tac Bear put his Diablo Programmer on it and it showed no codes, any ideas. When making a U-turn or a hard left turn at times the car wants to stumble under acceleration. I have been told that it is possibly a wheel sensor that is going bad. __________________ Mean Little Man Last edited by redhorse; 11-15-2010 at 11:15 AM.