09-08-2006, 12:48 PM | #1 |
Senior Member
Join Date: May 2005
Location: Between the A and the T
Posts: 365
|
fuel pump relay no voltage
hey, maybe someone can give me some ideas. i have no voltage to the fuel pump relay, none at the inertia sensor, or the ics, i ran all of them down on the schematic and they are all in the same circuit. i also noticed that the EEC has a fuel pump relay output, i have tested the inertia sensor and fuel relay, both test good. i direct wired relay and car runs fine.
thanks for any ideas p.s. on my 88 i had a problem with the ignition switch, and it would sporatically not supply voltag to the pump, which wire from the ignition switch supplies voltage to the pump, my schematic does not show one. |
09-08-2006, 01:17 PM | #2 |
Member
Join Date: Aug 2005
Location: Georgetown Ky
Posts: 48
|
What year car is this on?
__________________
306 (stock block),TFS Track Heat Heads, E303 Cam, TFS track heat intake, 70 mm TB, 75mm Pro-M,42 lb injectors,Aeromotive AFPR, 255 lph intank, Crane Hi-6/LX-92. Turbonetics 60-1 hi-fi Best ET: 11.88 @ 117mph 427 HP/ 480 ftlb TQ |
09-08-2006, 02:13 PM | #3 | |
Senior Member
Join Date: Sep 2005
Location: Boulder, CO
Posts: 463
|
Quote:
on a 90-93 the HAT supply is the Pk/Bk wire, and the EEC switch is the red wire. I dunno what schematics you're using, or even what year car ya got, but these might help http://i84.photobucket.com/albums/k3...n/EEC-93-1.jpg http://i84.photobucket.com/albums/k3...n/EEC-93-2.jpg
__________________
Jim Last edited by SkurdalenFox; 09-08-2006 at 02:26 PM. Reason: added crap |
|
09-08-2006, 09:37 PM | #4 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
I am thinking its a 90 model
|
09-11-2006, 10:30 AM | #5 |
Senior Member
Join Date: May 2005
Location: Between the A and the T
Posts: 365
|
its a 1990 model. thanks for the info, i will check those today. i take it the pcm power module is part of the pcm(eec).
|
09-11-2006, 12:07 PM | #6 |
Senior Member
Join Date: May 2005
Location: Between the A and the T
Posts: 365
|
i think i found it, the relay next to the ecm was severely corroded on the plug side, so i broke it open and the contacts are completely gone on the relay, i think this is the pcm relay as in the schematic, same wires, red 12v going in was good, nothing on any of the outputs.
thanks for the help, maybe im back in the game now. |
09-12-2006, 12:59 AM | #7 |
Senior Member
Join Date: May 2005
Location: Between the A and the T
Posts: 365
|
the pcm relay was it, now all i have to do is fix all of the wires that the previous idiot/ owner stripped back and the huge fuel pump access hole in the rear pan that they added.
|
09-12-2006, 06:29 AM | #8 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Glad to see you are making progress with it.
You should add it to the project room and keep us updated as you go along
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|