My 850rwhp street car project??? - Page 12

coupe · 05-09-2009, 01:51 PM

Yea... that thing is strong to go 114 in the 1/8.

Do you need a price on the whole thing, from turbo back to the mufflers? And we supply the stainless? Lemme know entirely what you need done and I'll give you the word! Congrats on a project actually getting to the track...wish mine were that far along.

klu408 · 05-09-2009, 02:23 PM

I think Im just going to do aluminized steel and I will supply parts. I think Im gonna do a 4 inch dp into a y and the 2 3.5 inch ultra flows? I know its overkill! Or do you think one single 3.5 would sufice? Give me a call and we can discuss it more. Thanks Matt

SlowJoe · 05-09-2009, 08:30 PM

little shake down runs! sweet

what boost you shooting for?

klu408 · 05-09-2009, 11:02 PM

Was hoping for 18 to 20 but it wont do me any good if I cant hook it on 12.....
9.70 is really all the ET I'm looking to get so I dont think it will take much more boost if I can get it to the ground. I can up the 2 step and leave on more boost and that should get me pretty close I think??

I was leaving @ 3500 and 4psi

rtusnake · 05-10-2009, 12:23 AM

I think it has alittle more than a 9.70 in it

klu408 · 05-10-2009, 08:17 AM

Quote:

Originally Posted by rtusnake

I think it has alittle more than a 9.70 in it

I like to here that... I guess all the BLOOD.SWEAT,AND TEARS are finally worth it.

Skillet · 05-10-2009, 08:32 AM

That's a nice MPH! Definitely has 9s in it.

klu408 · 05-10-2009, 01:10 PM

I may try to make it out to steele for the charity race..

Wickd GT · 05-12-2009, 05:26 AM

Quote:

Originally Posted by klu408

Well Had some traction issues last night but still managed to get a pass in that was spinning pretty much all the way down the track

Had to get out around the 1000 ft mark. Im gonna have to get me some slicks and do some suspension tuning, so I can turn the boost up!!

60'..........1.540
330'........4.202
1/8.........6.363
mph........114 !!!!!!
1/4.........10.36
mph........104

I think it has a 9 in it.... This was on 12 lbs. of Boost and E85

Base on the 1/8 mile et and the 114 mph, it should have run a 9.92 at 143mph, very strong mph for such low boost. Get ready when you turn that knob, strap down real good cause you going for a ride. Do your self a favor, do it on a safe track, got to MMP so you don't have to worry at over 140mph that shut down area after the 1/4 mile at steele and the clocks are set up right at MMP. Congrats on the numbers.

Edgar

Skillet · 05-12-2009, 08:45 AM

Quote:

Originally Posted by klu408

I may try to make it out to steele for the charity race..

Just make sure it's on a drag radial.

Even if it's not you can still TnT.

05-09-2009, 01:51 PM	#111
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Yea... that thing is strong to go 114 in the 1/8. Do you need a price on the whole thing, from turbo back to the mufflers? And we supply the stainless? Lemme know entirely what you need done and I'll give you the word! Congrats on a project actually getting to the track...wish mine were that far along. __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

05-09-2009, 02:23 PM	#112
klu408 Senior Member Join Date: May 2008 Location: Sand Mountian Posts: 180	I think Im just going to do aluminized steel and I will supply parts. I think Im gonna do a 4 inch dp into a y and the 2 3.5 inch ultra flows? I know its overkill! Or do you think one single 3.5 would sufice? Give me a call and we can discuss it more. Thanks Matt __________________

05-09-2009, 08:30 PM	#113
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	little shake down runs! sweet what boost you shooting for? __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

05-09-2009, 11:02 PM	#114
klu408 Senior Member Join Date: May 2008 Location: Sand Mountian Posts: 180	Was hoping for 18 to 20 but it wont do me any good if I cant hook it on 12..... 9.70 is really all the ET I'm looking to get so I dont think it will take much more boost if I can get it to the ground. I can up the 2 step and leave on more boost and that should get me pretty close I think?? I was leaving @ 3500 and 4psi __________________

05-10-2009, 12:23 AM	#115
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	I think it has alittle more than a 9.70 in it __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")

05-10-2009, 08:32 AM	#117
Skillet Lazy Bum Join Date: Aug 2005 Location: Moody Posts: 1,649	That's a nice MPH! Definitely has 9s in it.

05-10-2009, 01:10 PM	#118
klu408 Senior Member Join Date: May 2008 Location: Sand Mountian Posts: 180	I may try to make it out to steele for the charity race.. __________________