02-03-2008, 01:18 PM | #1 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
transmission ????
I bought a tranny from a local shop. He told me that it was what was in my car. So i drop my car off and call about it the next day and he says he can not get the speedo to work. So what could i say! i go and pick my car up and the tranny that came out of my car looks bigger to me. I did not get to see them side by side. He also told me when i picked it up that he could not use the shifter that was in my car and he had to use the one with the other tranny. My ? is did he put a t-45 in my car? i bought a spec stage 1 clutch to go in it. and i have some bad shaking when taking off in 1st or backing up. do i need to just keep on with the break in or is the in put shaft on the t-45 the same as the 3650 or what? should i stop driving it or what? thx
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
02-03-2008, 02:14 PM | #2 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
He might have put a t-45 in there. I know if will bolt up but the t-45 is mechanical speedo where your old 3650 was electronic speedo. Thats probably why your speedo isn't working. I believe you can fix that with a speedcal but thats not the tranny that came in your car. The shaking is probably clutch chatter from the new clutch breaking in.
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
02-03-2008, 02:15 PM | #3 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
Btw the input shafts are the same but I wouldn't want the T-45 since thats not what came in the car.
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
02-03-2008, 02:28 PM | #4 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
yea it sucks that it is not the same tranny but i can send my 3650 some where and have it rebuilt.Where can i get that part to fix the speedo for now? thx
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
02-03-2008, 02:51 PM | #5 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
I'm not 100% sure if it will fix it. It worked for my 96 when I put a t56 in it. Dallas mustang carries them. I believe there is a place in flordia thats called promotion that does good work. They are expensive though I believe
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
02-03-2008, 02:56 PM | #6 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
i dont want to spend anymore on this tranny.lol so no speedo for now
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
|
|