project Granny Sled - Page 7

ncontt · 05-09-2008, 07:17 PM

preciate it man...I need to get that residual glue/foam off the drivers side from the moulding that was on there. Need to get the interior tidied up (needs new carpet

), Need to wire up something other than the idiot gauges and track some grounds down under the dash :yay:

DC Controller should be here monday, wire that, put on rear sway bar, find some front coilover springs (12-250's if anyone has some laying around

) get some caster camber plates, and do some SERIOUS cleaning on the outside

ncontt · 05-12-2008, 10:32 PM

took off the A/C compressor today as it wasn't hooked up anyway. I won't have room up front for FMIC and condensor AND trans cooler and radiator, so out the door it went. I also put on the Trickflow A/C delete that a friend gave me and hooked up the power steering. DC Controller came in on sat and got it installed today (will see how it works tomorrow) pretty sure the neighbors don't want the mont cranked up at 11PM. AND got my reverse glow gauges wired in and working (they'll match my PHANTOM gauges) <---need to get them wired up as well, Trans temp, fuel press, oil press, and water temp....

CrazyInBlack · 05-13-2008, 10:17 AM

so did you have to rewire for the new computer? did I miss that step?

ncontt · 05-14-2008, 06:05 AM

Quote:

Originally Posted by CrazyInBlack

so did you have to rewire for the new computer? did I miss that step?

I took EVERY harness out of a wrecked 1990 stang and put into the mont....headlight harness to taillight harness and everything inbetween

A9P computer, dash/dash harness, heater box (with NEW heater core

) just about everything wired right up, I had to splice in the headlight wires and the side marker lights, everything else was pretty much plug and play. Although this harness had some issues to begin with, still tracking some grounding issues under the dash, but runs a $H!TLOAD better now....

This is for all intents and purposes a 4 dr mustang

CrazyInBlack · 05-14-2008, 01:28 PM

cool, congrads on the sucess

ncontt · 05-14-2008, 06:38 PM

Quote:

Originally Posted by CrazyInBlack

cool, congrads on the sucess

thanks....it's alot of fun to see peoples faces....especially with the 03 Mach rims on it...lol and the 4 wheel disk brakes...not to mention the sound, people don't know quite what to do/say LOL

Dale McPeters · 05-01-2009, 07:07 AM

Well now that we have given you a couple of days to get some batteries for the camera........Like Lee F. stated in my thread we need some updates......

ncontt · 05-03-2009, 07:55 PM

haha....those batteries are worn down now...LOL

Dale McPeters · 05-05-2009, 08:01 AM

Quote:

Originally Posted by ncontt

haha....those batteries are worn down now...LOL

I have some rechargable ones that leak will that work?

ncontt · 05-05-2009, 09:37 PM

sure....might as well put my camera out of it's misery...since the mac daddy canon we got for my son's trip to Africa this past summer got stolen by the carpet installers (we're about 90% sure of this)!!!!! :sob's:

05-09-2008, 07:17 PM	#61
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	preciate it man...I need to get that residual glue/foam off the drivers side from the moulding that was on there. Need to get the interior tidied up (needs new carpet ), Need to wire up something other than the idiot gauges and track some grounds down under the dash :yay: DC Controller should be here monday, wire that, put on rear sway bar, find some front coilover springs (12-250's if anyone has some laying around ) get some caster camber plates, and do some SERIOUS cleaning on the outside __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

05-12-2008, 10:32 PM	#62
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	took off the A/C compressor today as it wasn't hooked up anyway. I won't have room up front for FMIC and condensor AND trans cooler and radiator, so out the door it went. I also put on the Trickflow A/C delete that a friend gave me and hooked up the power steering. DC Controller came in on sat and got it installed today (will see how it works tomorrow) pretty sure the neighbors don't want the mont cranked up at 11PM. AND got my reverse glow gauges wired in and working (they'll match my PHANTOM gauges) <---need to get them wired up as well, Trans temp, fuel press, oil press, and water temp.... __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

05-13-2008, 10:17 AM	#63
CrazyInBlack Crusin... Join Date: Feb 2005 Location: Various Places in Middle AL Posts: 3,542	so did you have to rewire for the new computer? did I miss that step? __________________ Liberal education has nothing to do with liberal or conservative politics. Liberal education is the simple idea of a broad and well-rounded course of study in the humanities, social sciences, sciences, and the arts. The overarching goal is to liberate the mind from ignorance and superstition.

05-14-2008, 01:28 PM	#65
CrazyInBlack Crusin... Join Date: Feb 2005 Location: Various Places in Middle AL Posts: 3,542	cool, congrads on the sucess __________________ Liberal education has nothing to do with liberal or conservative politics. Liberal education is the simple idea of a broad and well-rounded course of study in the humanities, social sciences, sciences, and the arts. The overarching goal is to liberate the mind from ignorance and superstition.

05-01-2009, 07:07 AM	#67
Dale McPeters 5.0 Block/Walnut Cracker Join Date: May 2005 Location: Working.... Posts: 2,409	Well now that we have given you a couple of days to get some batteries for the camera........Like Lee F. stated in my thread we need some updates...... __________________ '14 Dodge Challenger SRT8 392 6-speed

05-03-2009, 07:55 PM	#68
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	haha....those batteries are worn down now...LOL __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

05-05-2009, 09:37 PM	#70
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	sure....might as well put my camera out of it's misery...since the mac daddy canon we got for my son's trip to Africa this past summer got stolen by the carpet installers (we're about 90% sure of this)!!!!! :sob's: __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~