06-11-2008, 09:13 PM | #1 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
wheel stud knurl Diameter
what size are mine on the 02?
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project Last edited by SlowJoe; 06-12-2008 at 08:07 AM. |
06-12-2008, 03:20 AM | #2 |
Member
Join Date: Feb 2008
Location: Ft Payne, AL
Posts: 73
|
1/2" joe
__________________
'89 LX 5.0 Hatch, '89 LX Coupe 5.0 '86 Coupe with a complete PI 4.6/5 speed drivetrain swap, 4.10 gears, 4 wheel disc working on 10th anniversary Cobra brake conversion '85 GT , project name: Extra Partstang! Building it from all my extra parts laying around! |
06-12-2008, 07:29 AM | #3 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
the part that presses in. i know they r 1/2" summit is showing like .612 and stuff.
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
06-12-2008, 08:48 AM | #4 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
0.625 is the knurl
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
06-12-2008, 12:52 PM | #5 |
Member
Join Date: Feb 2008
Location: Ft Payne, AL
Posts: 73
|
k gotcha....
__________________
'89 LX 5.0 Hatch, '89 LX Coupe 5.0 '86 Coupe with a complete PI 4.6/5 speed drivetrain swap, 4.10 gears, 4 wheel disc working on 10th anniversary Cobra brake conversion '85 GT , project name: Extra Partstang! Building it from all my extra parts laying around! |
06-12-2008, 12:59 PM | #6 |
Senior Member
Join Date: Dec 2006
Location: Birmingham
Posts: 168
|
depends, front are smaller than rear
front .594" rear .618" you can however use the .625's(ARP#100-7703) in the rear which are much cheaper(i did) but using them in the front is very risky without using a 39/64 drill bit to enlarge the holes in the front first to keep from cracking the hub i just used the .625's in my mosers in the rear and use moroso 710-46185 in the front |
|
|