wheel stud Diameter

SlowJoe · 06-11-2008, 09:13 PM

what size are mine on the 02?

TooManyMustangs · 06-12-2008, 03:20 AM

1/2" joe

SlowJoe · 06-12-2008, 07:29 AM

the part that presses in. i know they r 1/2" summit is showing like .612 and stuff.

SlowJoe · 06-12-2008, 08:48 AM

0.625 is the knurl

TooManyMustangs · 06-12-2008, 12:52 PM

k gotcha....

sleepinggt · 06-12-2008, 12:59 PM

depends, front are smaller than rear

front .594"
rear .618"

you can however use the .625's(ARP#100-7703) in the rear which are much cheaper(i did) but using them in the front is very risky without using a 39/64 drill bit to enlarge the holes in the front first to keep from cracking the hub

i just used the .625's in my mosers in the rear and use moroso 710-46185 in the front

06-12-2008, 03:20 AM	#2
TooManyMustangs Member Join Date: Feb 2008 Location: Ft Payne, AL Posts: 73	1/2" joe __________________ '89 LX 5.0 Hatch, '89 LX Coupe 5.0 '86 Coupe with a complete PI 4.6/5 speed drivetrain swap, 4.10 gears, 4 wheel disc working on 10th anniversary Cobra brake conversion '85 GT , project name: Extra Partstang! Building it from all my extra parts laying around!

06-12-2008, 07:29 AM	#3
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	the part that presses in. i know they r 1/2" summit is showing like .612 and stuff. __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

06-12-2008, 08:48 AM	#4
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	0.625 is the knurl __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

06-12-2008, 12:52 PM	#5
TooManyMustangs Member Join Date: Feb 2008 Location: Ft Payne, AL Posts: 73	k gotcha.... __________________ '89 LX 5.0 Hatch, '89 LX Coupe 5.0 '86 Coupe with a complete PI 4.6/5 speed drivetrain swap, 4.10 gears, 4 wheel disc working on 10th anniversary Cobra brake conversion '85 GT , project name: Extra Partstang! Building it from all my extra parts laying around!

06-11-2008, 09:13 PM	#1
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	wheel stud knurl Diameter what size are mine on the 02? __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project Last edited by SlowJoe; 06-12-2008 at 08:07 AM.

06-12-2008, 12:59 PM	#6
sleepinggt Senior Member Join Date: Dec 2006 Location: Birmingham Posts: 168	depends, front are smaller than rear front .594" rear .618" you can however use the .625's(ARP#100-7703) in the rear which are much cheaper(i did) but using them in the front is very risky without using a 39/64 drill bit to enlarge the holes in the front first to keep from cracking the hub i just used the .625's in my mosers in the rear and use moroso 710-46185 in the front