12-08-2005, 07:36 PM | #21 |
Bet I red light B4U
|
Re: HELP Running lean with 50lbs injectors
Still lost.. I sent the meter back flow test shows that its fine. Think I might have a wiring problem. Correct me if I'm wrong I should be able to hook the 02 up and disconnect the maf and run the car with the o2 with the 50s and it should run stupid rich? Well it will still lean it out. Any ideals.
|
12-08-2005, 07:50 PM | #22 | |
Friends
Join Date: Dec 2004
Location: Southern Colorado
Posts: 2,452
|
Re: HELP Running lean with 50lbs injectors
Quote:
|
|
12-08-2005, 08:03 PM | #23 |
Bet I red light B4U
|
Re: HELP Running lean with 50lbs injectors
43psi and the pump is that new holley forced induction intank. Fuel pressure increases with boost 1:1
|
12-08-2005, 08:07 PM | #24 |
Bet I red light B4U
|
Re: HELP Running lean with 50lbs injectors
Even at idle running of the o2 its lean.
|
12-09-2005, 03:05 AM | #25 | ||
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: HELP Running lean with 50lbs injectors
Quote:
Quote:
I may have missed it somewhere but do you have a w/b 02 setup? Just trying to figure out how you know that you are lean (aside from the dyno trip you mentioned earlier) Is your Pro-M setup in a draw through or blow through and is calibrated for that?
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
||
12-09-2005, 03:08 AM | #26 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: HELP Running lean with 50lbs injectors
Also,
have you verified that your base timing is set where it needs to be. I noticed you mentioning the headers glowing red at idle, can't incorrect timing cause this as well?
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
12-09-2005, 10:30 AM | #27 | |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: HELP Running lean with 50lbs injectors
Quote:
__________________
'14 Dodge Challenger SRT8 392 6-speed |
|
12-09-2005, 06:03 PM | #28 |
Bet I red light B4U
|
Re: HELP Running lean with 50lbs injectors
Base timing with pill pulled is 6 degrees adv. My cam is 4 degrees adv. Can 4 degrees cause lean condition, but the car idles good. my meter should be back monday guess I need to wait and see what it does. Maybe the recal was bad and they fixed and didn't tell me. I can only hope.
|
12-09-2005, 06:20 PM | #29 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: HELP Running lean with 50lbs injectors
I thought you already had your meter back. How did you come to the lean conclusion last night if you don't have a meter?
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
12-11-2005, 10:39 AM | #30 |
Bet I red light B4U
|
Re: HELP Running lean with 50lbs injectors
I thought i could run it off of the o2 since the stock computer is 19lbs injector and the o2 will only pull out about 20% of fuel out i thought it should still run rich but i guess i was wrong still lean. Then i put a stock maf on and stuck a 1/4 socket in the opening restricting the amount of air the maf would read and got it running somewhat ok.
|
|
|