StreetStangs.net  

Go Back   StreetStangs.net > Technical > Dyno Room

Reply
 
Thread Tools Display Modes
Old 11-29-2008, 07:10 PM   #1
stock94
Member
 
stock94's Avatar
 
Join Date: Mar 2005
Location: Atlanta, Ga.
Posts: 71
Tuned car

Went to Blakes dyno on monday night, Best I could get was 393 to the wheels. Doug at Bama Chips tuned it and installed a cold air intake and smaller pulley. Found out only getting 6.9 lbs. of boost, belt was slipping on the top side. I also was running out of fuel up top, to much for stock pump. Pulley was advertised as 7 to 9 lbs. also added the bigger idler, was no help. Anyone got any suggestions on how to stop or minimize slippage? It's a roushcharger. Also where can I get a boosta pump? Another question, any suggestions on how to get rid of some of the cement blocks weighting down the car. It's an 05GT? Oh yeah, forgot what the torque was, somewhere in the mid 300s
stock94 is offline   Reply With Quote
Old 11-29-2008, 08:01 PM   #2
yellowSVT
Senior Member
 
yellowSVT's Avatar
 
Join Date: Mar 2007
Location: anniston/saks
Posts: 1,459
boosta pump from kenne bell or sometimes you can find them on svtp for a good deal! i bought mine from there!
__________________
http://i171.photobucket.com/albums/u...DSC02715-1.jpg
2004 cobra MGW shifter,spec 3+ clutch, billet flywheel, 3.75 upper pulley, banssanni exaust, 3.4 whipple, 60lb injectors, fore rails and hat, gt40 pumps, dual bypass heat exchanger. 660hp/600tq
http://s171.photobucket.com/albums/u...t=M2U00182.flv
2012 f150 4x4 5.0 blk
2012 rzr LE S orange
2012 rzr LE silver/blk
2003 DSG lightning
2001 ford focus ZX3 silver
yellowSVT is offline   Reply With Quote
Old 11-30-2008, 12:32 AM   #3
RedSuperRanger23
Gizmo
 
RedSuperRanger23's Avatar
 
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
a cap full of VHT on the belt is a quick fix. What kind of belt are you running?
__________________
94 Mustang GT
89 Ranger XLT
96 F150 XLT
04 Crown Vic
RedSuperRanger23 is offline   Reply With Quote
Old 11-30-2008, 02:54 AM   #4
stock94
Member
 
stock94's Avatar
 
Join Date: Mar 2005
Location: Atlanta, Ga.
Posts: 71
I'm running the stock roush belt that came with the blower.
stock94 is offline   Reply With Quote
Old 11-30-2008, 02:59 AM   #5
stock94
Member
 
stock94's Avatar
 
Join Date: Mar 2005
Location: Atlanta, Ga.
Posts: 71
Quote:
Originally Posted by yellowSVT View Post
boosta pump from kenne bell or sometimes you can find them on svtp for a good deal! i bought mine from there!
Thanks I'll give em a look.
stock94 is offline   Reply With Quote
Old 11-30-2008, 12:11 PM   #6
86nu
Senior Member
 
86nu's Avatar
 
Join Date: May 2007
Location: orlando florida
Posts: 165
Send a message via AIM to 86nu Send a message via Yahoo to 86nu
if you put a smaller pulley on, you might want to look into a slightly small belt, not much, just a hair
__________________
86 Coupe aka the battle ship

H/C/I, Nitrous, bla bla bla all on a 351
86nu is offline   Reply With Quote
Old 12-01-2008, 12:07 AM   #7
RedSuperRanger23
Gizmo
 
RedSuperRanger23's Avatar
 
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
I dont know anything about the Roush Belts, but we used a Gatorback belt on my friends Lightning. It seemed to do a lot better with the larger idler pulleys too.
__________________
94 Mustang GT
89 Ranger XLT
96 F150 XLT
04 Crown Vic
RedSuperRanger23 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:42 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.