StreetStangs.net  

Go Back   StreetStangs.net > Technical > Ford Pushrod Tech (5.0 & 5.8)

Reply
 
Thread Tools Display Modes
Old 01-12-2012, 03:17 PM   #1
H8IMPORTS
Member
 
Join Date: Jan 2011
Posts: 82
What intake to run on a DSS 308?

I have a DSS 308 (level 1) in my coupe. It has a X303 cam, Windsor J/r heads and right now a Explorer intake. I want a good all around intake but would like it to pull harder on top side. I have a Victor 5.0 and a Spyder intake at the house and was wanting to know if they might be better. I have someone wanting to buy the Explorer Intake and so I thought about selling it and using another one on my car. I dynoed my car and it only put 276 to the tires which to me is low but it was way to rich! So I also thought if I had a better flowing intake it would lean it up and hope it make more power that way as well. Later on I'm going turbo but for now it's a N/a car with a 125 shot. The car is 99% always on the motor though. (Nitrous is getting to expensive hince why I'm going turbo lol)
__________________
Just your average 92 Coupe with a Cam Only 302!

Drive it like you stole it because everyone dies but not everyone lives!
H8IMPORTS is offline   Reply With Quote
Old 01-12-2012, 06:01 PM   #2
yellowSVT
Senior Member
 
yellowSVT's Avatar
 
Join Date: Mar 2007
Location: anniston/saks
Posts: 1,459
i have a bbk with fuel rails and amm hardware and gaskets nib....
__________________
http://i171.photobucket.com/albums/u...DSC02715-1.jpg
2004 cobra MGW shifter,spec 3+ clutch, billet flywheel, 3.75 upper pulley, banssanni exaust, 3.4 whipple, 60lb injectors, fore rails and hat, gt40 pumps, dual bypass heat exchanger. 660hp/600tq
http://s171.photobucket.com/albums/u...t=M2U00182.flv
2012 f150 4x4 5.0 blk
2012 rzr LE S orange
2012 rzr LE silver/blk
2003 DSG lightning
2001 ford focus ZX3 silver
yellowSVT is offline   Reply With Quote
Old 01-12-2012, 06:40 PM   #3
BIGDATOWN
Senior Member
 
Join Date: Aug 2010
Posts: 221
I would say the victor 5.0 would do better than the spyder intake IMO
BIGDATOWN is offline   Reply With Quote
Old 01-12-2012, 07:29 PM   #4
QWKSNKE
3v's are slow
 
QWKSNKE's Avatar
 
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
Quote:
Originally Posted by BIGDATOWN View Post
I would say the victor 5.0 would do better than the spyder intake IMO
+1....
__________________
2009 Porsche Carrera S
2008 ///AMG C63.. Eurocharge Tune. RIP
2019 AMG GLC43..wife's
03 F250 SD.. Edge Evo, AFE Stage 1 CAI
08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's
01 Cobra vert... wife's

I need a new toy
QWKSNKE is offline   Reply With Quote
Old 01-12-2012, 07:36 PM   #5
03slobra
Senior Member
 
03slobra's Avatar
 
Join Date: Nov 2006
Posts: 488
go with the victor or trade me the victor for my edelbrock rpm2 which would be perfect for what you got
__________________
Preston
1947 mercury 2door coupe 331w/tko 600 project
2003 f350 5in lift 6.0 with upgraded stuff!!!
03slobra is offline   Reply With Quote
Old 01-13-2012, 06:26 AM   #6
H8IMPORTS
Member
 
Join Date: Jan 2011
Posts: 82
Thanks but I dont want to buy any intakes right now and 03slobra I might do that if my intake wasn't show polished. I like the RPM 2's. I don't care for the regular RPM's. Lol.

So I guess my next question would be if the victor 5.0 will fit under the stock hood?
__________________
Just your average 92 Coupe with a Cam Only 302!

Drive it like you stole it because everyone dies but not everyone lives!
H8IMPORTS is offline   Reply With Quote
Old 01-13-2012, 11:52 AM   #7
03slobra
Senior Member
 
03slobra's Avatar
 
Join Date: Nov 2006
Posts: 488
Yea it should
__________________
Preston
1947 mercury 2door coupe 331w/tko 600 project
2003 f350 5in lift 6.0 with upgraded stuff!!!
03slobra is offline   Reply With Quote
Old 01-14-2012, 09:00 PM   #8
H8IMPORTS
Member
 
Join Date: Jan 2011
Posts: 82
Thanks. Hope so. I will find out. Lol.
__________________
Just your average 92 Coupe with a Cam Only 302!

Drive it like you stole it because everyone dies but not everyone lives!
H8IMPORTS is offline   Reply With Quote
Old 01-15-2012, 09:02 AM   #9
gearbanger
Junior Member
 
Join Date: Jul 2011
Posts: 1
My buddy had a Victor 5.0 intake and it worked very well. His car ran high 7's in the 1/8th N/A and 6'20's when boosted.
gearbanger is offline   Reply With Quote
Old 01-17-2012, 09:41 AM   #10
H8IMPORTS
Member
 
Join Date: Jan 2011
Posts: 82
Can someone clean my thread up? Thanks

Also what about a Trick Flow Race intake. It's not the box upper its the race intake. I have one on my 91 GT I can take off and run on my coupe. I can run the Spyder intake on the GT. The GT is fixing to get a 200 shot so I don't think it will lose any down low from the Spyder intake. lol So would the Trick Flow Race be better than the Victor?
__________________
Just your average 92 Coupe with a Cam Only 302!

Drive it like you stole it because everyone dies but not everyone lives!
H8IMPORTS is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:07 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.