10-16-2010, 07:24 AM | #21 |
Friends
Join Date: Dec 2004
Posts: 1,645
|
Well my tuner call me last night. He said he got it tune and fixed, he said there is turbulence in the air meter. So he wants to move the blow off valve and the Mass air meter away from the curve of the inter cooler, move it a bit higher, he said about 3-4" so the air can straighten out. Ok here it goes, I was at Montgomery last night helping Mike with his limited street car, when I get a text from my tuner to call him. I said oh shit this thing blow up! Well he said I have it tune and corrected, but then he ask me what internals are in the motor, I said everything is forge, but the block is stock. He said " Well I can't go any further I have it at 552hp and 672ft lbs and have not yet hit 80% duty cycle on the injectors and the Mass is not even close to be pegged!!! Oh and that's on 9psi!!! I said how you know that, you were only tuning on the street. He said he went to Wayne's dyno which has the eddie brake on it and made a couple of pulls to check his tune and he said the car is big time violent at the hit. The torque comes in right at 3000rpm and stays that way, Damn!!! Now he said to make it better need to fixed the Tranny. So I said to him that I'm going to order an AOD that hold 950hp with a full manual valve body.
Here is the kicker, he said I want to take this one off and put the new one in at no charge to you, my name is on this car and I want to be put out there. I said DEAL!! This guy got the Moates/Quarter horse program and with the company that sold him this equipment got live with him on his laptop and looked at everything he did, he said to him, you don't need my help you have right on. This guy tunes the newer model Mustangs through the SCT hand held stuff and showed me a car that was pretty much stock, an 03 cobra, and I could not beleive the Hp he got out of it. This guy is a Ford genius! Our local Ford dealers come to him for help and tools they don't have and can't get, this guy has it. So the person that was Live with him on the tuning read the tune from the SCT chip, quote " Who ever tune this car he only tune for WOT, only and did not run it on the street for cruise tune. All parameters were off big time making the computer fight against all or any changes made. One thing they found was that the O2 sensors were fighting each other. The O2 sensors are in a 45* angle in the down pipe, so driver side was telling the computer that it was lean but the passenger side was signaling that it was rich. So tuner turn the drivers side off and all eight cylinders are reading from the passenger side one. Anyway this guy is very friendly down to earth and a great person to deal with plus he is into racing too. You should see the F250's diesels, Duramax and Dodge when he tunes them. I saw an F250 with 39" tires and a raised kit, bad ass truck, showed me after he put studs and new gasket to a 6.0 stroke, blow off all four tires at the hit, I'm saying like there were stock tires on them, I was shocked when I saw that. So, he still has the car and said to me, until the tranny gets here he will make more adjustments until he gets it perfect. To say I'm a happy customer, yes and will put my neck on the line recommending him to anyone. His shop is called Pro Masters, in Enterprise. Edgar Last edited by Wickd GT; 10-16-2010 at 07:28 AM. |
10-16-2010, 07:38 AM | #22 |
Senior Member
Join Date: Jun 2008
Location: Pell City, AL
Posts: 418
|
That's good to hear Edgar! It's amazing the power a turbo car will make. Better be careful with that stock block...seems a lot of the turbo 5.0 guys have broken them when over 500rwhp.
Who did the SCT tune that was no-good? |
10-16-2010, 08:24 AM | #23 |
Friends
Join Date: Dec 2004
Posts: 1,645
|
|
10-16-2010, 09:32 AM | #24 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
If he has it right, car should still get good fuel economy while making big power. we had the cobra at 536rwhp and a hair under 21mpg on the highway with the a/c on.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
10-16-2010, 09:48 AM | #25 |
pro-jackstand racer
|
that's awesome!!!
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
10-16-2010, 09:57 AM | #26 |
Friends
Join Date: Dec 2004
Posts: 1,645
|
By the way, this is all happening at up 5000rpms, he didn't want to go further cause the power was still climbing. I just put a deposit on an AOD 700 hp tranny with full manual valve body from www.Silverfoxtrans.com Built for Cheo's car specs. Lifetime warranty, can't beat that.
Edgar |
10-16-2010, 03:23 PM | #27 |
Friends
Join Date: Dec 2004
Location: Tempe Arizona
Posts: 3,029
|
Awesome !! congrats!
__________________
2020 Range Rover Sport HSE P525 Dynamic - Firenze Red - Supercharged 5.0 - 518 HP SOLD - 2010 Camaro SS [/B] - Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/ |
10-16-2010, 06:12 PM | #28 |
Friends
Join Date: Dec 2004
Posts: 1,645
|
Here is the Dyno sheet:
|
10-17-2010, 06:46 PM | #29 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
you better watch it he is going to blow by you! glad you got it work out
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
10-22-2010, 04:01 PM | #30 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Glad you went with Dan @ Silverfox Transmissions!
I've talked to him about built AOD's before also. He's prominent over on www.clickclickracing.com |
|
|