03-23-2008, 09:53 PM | #1 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
1993 Teal Cobra Rebuild Progress
Well I have been doing a lot of work on the cobra over the past couple of weeks. So I decided that I would just start a project car thread since it has went far above what I had originally planned....
This project will probably last the rest of the year and part of next year as real work always seems to get in the way of play time... Complete drivetrain has been removed. Stock block has been put in the scrap pile. (will post pictures of this later as Lee F. can now say that he has definately killed a stock block..) Another stock block is in the machine shop and all existing internals will be swapped to this block for now. Current items purchased as of 7/14/09 > Dart 8.2 deck 4 bolt main block purchased on 4/3/09 arrived on 6/9/09 ? (Done) 363 forged rotating assembly w/ dished pistons purchased (Done) New Anderson B451hr cam & spring package purchased (This week 7/17/09) New Vortech V2-Si blower pullied for 15-16lbs purchased (Done) New Fidanza flywheel purchased (Done) New SFI balancer purchased (Done) New Arp main & head studs for block above (Done) Current items installed or about to be installed > Have installed new deluxe head light kit. (Done) Have new outside door handles ready to install. New complete interior screw kit ready for installation. New 130 amp alternator. (Have but not installed) New AC upgrades, condensor, brackets, compressor etc. New radiator and rubber insulators, hoses etc. New door & hatch weather stripping. Rebuild T-5 transmission (Done) New Pypes X-Pipe with Cats (for street & inspection use......) (Done) New Stainless bolt kit for entire engine including intake etc. (Done) Install autometer gauges that were in the 347 car. Permanent install of FJO WB AFR-165's to machine shop for rework (3/24/08) Back on 3/26/08 Other stock block Back on 3/26/08 To frame shop to have body tweaked (Done) Future items to be done or bought installed > Re-built TR-3550 transmission with upgrades and Pro 5.0 shifter. Rebuild 8.8 & Tig weld rear axle tubes on axle housing. New Maximum Motorsports type full length subframe connectors. Repair upper & lower torque boxs and add reinforcments. Along with home made jacking rails. (Partially done) Billet steel flywheel (have this item) New front seat upholstry & carpet Some kind of blower installation (vortec, turbo....Lee H. has not made up his mind for me yet...) Install AEM EMS, GM map, EGT for tuning All these upgrades additions will be an ongoing transition for the little cobra... Will post pictures as I have time. Updated on 7/14/09
__________________
'14 Dodge Challenger SRT8 392 6-speed Last edited by Dale McPeters; 07-14-2009 at 06:26 PM. |
03-24-2008, 06:26 AM | #2 |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
nice sounds like fun and alot of money. good luck
__________________
Bottled 89 Coupe |
03-24-2008, 08:59 AM | #3 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Thanks, fortunately I already had a lot of the items that cost a lot of money.
Like the AEM EMS & Tremec 3550 etc. The only real high dollar item is going to be the boss block & crank. But the cobra is worthy.....
__________________
'14 Dodge Challenger SRT8 392 6-speed |
03-24-2008, 05:17 PM | #4 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
I still cannot believe the block was cracked.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
03-24-2008, 05:36 PM | #5 |
Bet I red light B4U
|
I can't beleive it had 1 oil leak
__________________
89 gt 2.3 stroked holley head with n12n port high flow intake with great big fart can skunk 2 seat belts with kool glow water squirters and new light up shift knob basically everything from wal-mart art carr C4 10.53@127.3 w/ 1.53 60' 89 gt vert 347 eldebrock heads and intake AOD w/3000 stall unknown with 5spd went 12.7 on steet tires 04 Mach1 automatic flowmaster K+N drop in 13.9 |
03-24-2008, 06:36 PM | #6 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
I will get pictures posted in a little while along with the six head studs that I could not get out even by heating the block to the point of melting.....
Really it just had one oil leak. A steady stream right out the rear of the block. Ask Lee F. why it was leaking......I just can not bring myself to post the reason.... It is a good thing that it was leaking though as I would have never have pulled the engine and found the crack in the block. If I had not pulled it the pistons & rods would have probably been caught by the main girdle.....
__________________
'14 Dodge Challenger SRT8 392 6-speed |
03-24-2008, 06:45 PM | #7 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
he already knows
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
03-24-2008, 08:19 PM | #8 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Here are a few pictures look right at the end of the screw driver and you can see the crack...it goes all the way to the cam tunnel.
It is in the #2 main journal...
__________________
'14 Dodge Challenger SRT8 392 6-speed Last edited by Dale McPeters; 03-24-2008 at 08:22 PM. |
03-24-2008, 08:21 PM | #9 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Here are some pictures of the head studs that I could not get out of the block by any means including the red torch....
More later...as I have to order some more parts from Summit....
__________________
'14 Dodge Challenger SRT8 392 6-speed Last edited by Dale McPeters; 03-24-2008 at 08:24 PM. |
03-24-2008, 08:28 PM | #10 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Oh one more showing empty engine bay.....
__________________
'14 Dodge Challenger SRT8 392 6-speed |
|
|