05-23-2006, 10:56 AM | #1 |
Member
Join Date: Apr 2006
Location: Tampa, FL
Posts: 50
|
cam swap--what all is involoved?
so, what all is involved in a cam swap? i feel comfortable around every aspect of the engine except the valvetrain, when i start having to work in that area i get nervous. so whats involved in the cam swap. in short, its essentially putting some lubricant on the new cam carefully putting in it and then making sure everything is lined up and degreeing it correct? of course it is more in depth than that but summed up in short thats what is done right?
just for referance i will have the heads and intake already removed, and plan on putting new lifters in aswell. |
05-23-2006, 11:34 AM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: cam swap--what all is involoved?
you don't have to remove heads. Just the intake, lifters, rocker arms, and front of the motor.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
05-23-2006, 12:51 PM | #3 |
Member
Join Date: Apr 2006
Location: Tampa, FL
Posts: 50
|
Re: cam swap--what all is involoved?
now after I degree the cam I will need to adjust lifter preload and rocker arm geometry right? or is that only sometimes needed?
|
05-23-2006, 02:09 PM | #4 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Re: cam swap--what all is involoved?
Where you at...one of us can come show you. It's best left to someone who's done it.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
05-23-2006, 02:40 PM | #5 |
Member
Join Date: Apr 2006
Location: Tampa, FL
Posts: 50
|
Re: cam swap--what all is involoved?
the swap is down the road a lil ways, im just trying to make sure i got it figured out long before i attempt it. i've been reading alot about valvetrain installation and what not preparing myself for when i do it.
though when im ready ill porlly get someone thats has done it before to help, just to be on the safe side, good idea |
05-23-2006, 02:57 PM | #6 |
Friends
Join Date: Mar 2005
Location: McCalla
Posts: 1,241
|
Re: cam swap--what all is involoved?
This is on a 5.0L right? The way I always did it was to remove all said parts, put #1 cyl at TDC, inserted cam, lined up keyway on crank and cam, put on chain, rotate the valve train til each cyl was at TDC, torque down rockers, and then reassemble the engine.
|
05-23-2006, 03:05 PM | #7 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: cam swap--what all is involoved?
Quote:
I don't degree cams. I have never put a stout enough combination together to warrant doing it. I have always just installed "dot to dot" As far as rocker arm adjustment, what type of setup do you have? Aftermarket heads with stud mount rockers or stock heads with pedestal mount rockers? |
|
05-23-2006, 03:34 PM | #8 | |
Member
Join Date: Apr 2006
Location: Tampa, FL
Posts: 50
|
Re: cam swap--what all is involoved?
Quote:
|
|
05-23-2006, 03:35 PM | #9 | |
*WWIP* Saving for Evo XXI
Join Date: Dec 2004
Location: You like my biodata. B-i-o-d-a-t-a!
Posts: 1,693
|
Re: cam swap--what all is involoved?
Quote:
|
|
|
|