11-29-2008, 07:10 PM | #1 |
Member
Join Date: Mar 2005
Location: Atlanta, Ga.
Posts: 71
|
Tuned car
Went to Blakes dyno on monday night, Best I could get was 393 to the wheels. Doug at Bama Chips tuned it and installed a cold air intake and smaller pulley. Found out only getting 6.9 lbs. of boost, belt was slipping on the top side. I also was running out of fuel up top, to much for stock pump. Pulley was advertised as 7 to 9 lbs. also added the bigger idler, was no help. Anyone got any suggestions on how to stop or minimize slippage? It's a roushcharger. Also where can I get a boosta pump? Another question, any suggestions on how to get rid of some of the cement blocks weighting down the car. It's an 05GT? Oh yeah, forgot what the torque was, somewhere in the mid 300s
|
11-29-2008, 08:01 PM | #2 |
Senior Member
Join Date: Mar 2007
Location: anniston/saks
Posts: 1,459
|
boosta pump from kenne bell or sometimes you can find them on svtp for a good deal! i bought mine from there!
__________________
http://i171.photobucket.com/albums/u...DSC02715-1.jpg 2004 cobra MGW shifter,spec 3+ clutch, billet flywheel, 3.75 upper pulley, banssanni exaust, 3.4 whipple, 60lb injectors, fore rails and hat, gt40 pumps, dual bypass heat exchanger. 660hp/600tq http://s171.photobucket.com/albums/u...t=M2U00182.flv 2012 f150 4x4 5.0 blk 2012 rzr LE S orange 2012 rzr LE silver/blk 2003 DSG lightning 2001 ford focus ZX3 silver |
11-30-2008, 12:32 AM | #3 |
Gizmo
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
|
a cap full of VHT on the belt is a quick fix. What kind of belt are you running?
__________________
94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic |
11-30-2008, 02:54 AM | #4 |
Member
Join Date: Mar 2005
Location: Atlanta, Ga.
Posts: 71
|
I'm running the stock roush belt that came with the blower.
|
11-30-2008, 02:59 AM | #5 |
Member
Join Date: Mar 2005
Location: Atlanta, Ga.
Posts: 71
|
|
11-30-2008, 12:11 PM | #6 |
Senior Member
|
if you put a smaller pulley on, you might want to look into a slightly small belt, not much, just a hair
__________________
86 Coupe aka the battle ship H/C/I, Nitrous, bla bla bla all on a 351 |
12-01-2008, 12:07 AM | #7 |
Gizmo
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
|
I dont know anything about the Roush Belts, but we used a Gatorback belt on my friends Lightning. It seemed to do a lot better with the larger idler pulleys too.
__________________
94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic |
Thread Tools | |
Display Modes | |
|
|