07-25-2010, 12:39 PM | #1 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Side exhaust is on the svo.
I'm done! Took a roush side muffler then cut and shaped it to fit the drivers side. I cut a lot out because of the cobra IRS. That takes up all the room.
The special part is you can't see it. The subframe connectors make it almost impossible to run lower springs. unless you go thru the frame. I cut a 3.5" hole where the brake cable runs and ran a 2.5" pipe with a turn down. Did the fiberglass wrap around it and then used very stiff holders to keep it from rubbing. THe frame is still very strong because of the subframes. IT is quiet again. Loud with WOT but nice to ride around in. Except for the 100 degree heat. No ac.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
07-25-2010, 03:02 PM | #2 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
07-25-2010, 03:21 PM | #3 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
07-25-2010, 04:26 PM | #4 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Whats to see. Next time its in the shop I will take a pic.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
07-29-2010, 08:29 AM | #5 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Oh hell that was supposed to be.....
__________________
'14 Dodge Challenger SRT8 392 6-speed |
Thread Tools | |
Display Modes | |
|
|